Question about 1994 Pontiac Grand Am

2 Answers

I need a new steering column, how much will this cost

94 Grand Am

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This si a one year only item and its a very hard one to find. I would reccomend looking on the website called car-part.com they can locate one for you and give you price on the spot.

Posted on Dec 03, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

I hope you can find one, that year of car is probably crushed and it is in a new car down the street. check the internet for automobile wreckers ot recyclers, there is an association that these people belong to so iot gives you access to the us can and maybe mex. they can do a search and see if there is still on around.
you willl be surprized what other columns fit other vechiles, usually as an example :
pontiac <---> chevy firebird<----> camaro, in your case grand am <---> luguna (canada)

Posted on Nov 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is 2001 grand am steering wheel column wiring


The wiring for the steering column is inside the column. What do you need to do? Be careful if you do not know what you are doing. If you need help let me know.. I work on cars.

Aug 12, 2014 | 2001 Pontiac Grand Am SE

1 Answer

Power steering goes out intermittently. Had the steering column replaced 4 years ago now the problem is backm dealer said I may need new gearbox. And column replacement @ a cost of 1700.00


I dont think this car has a gear box,did you crash on that car to need to replace the steering column,you need to check first if the power steering pump has enogh pressure,the other part you need to check is the rack and pinion.

Oct 20, 2010 | 2004 Chevrolet Malibu

2 Answers

94 Ford Ranger, ignition assembly loose. Will not start unless I jimmy the assembly in towards the steering column. Require removal of steering wheel to fix?


Thats ok mam,i,m 62,retired with 19 yrs experience in automotive field.Ford cars and trucks.And several different importsBut i quit in 1996.
I,m thinking that the,gears may be out of timing and the actuating rod that moves the ignition switch contacts at or near the bottom of the steering colmn.
You should repair the key cylinder, and the tumbler that the key actuates.Then you may also need to adjust the switch assy contact box at the bottom.These are a high wear items over a lot of yrs, and useage,and might be best to pay one time, and fix it right.I used to repair tilt steering wheels,and found that its less costly just to buy a good used steering column with key and all,but now days i,m not so sure! ??? hope i was helpful!
Good luck on this problem,as i know costs are high every where.

Sep 17, 2010 | 1992 Ford Ranger

2 Answers

Want to bypass powersteering pump on 94 grand caravan 3.3 liter 6 cylinder, pulley making loud noise need new belt size and serpintine diagram if its possible


that's not possible all of those vehicles came stock with power steering so all belt dimensions are taking the power steering pump into consideration,the only one that would change would be the A/C belt depending on whether or not your vehicle came with it or not,a used power steering pump should only cost just a little bit more then a new serpentine belt,hope this helps and good luck

Jun 19, 2010 | 1994 Dodge Grand Caravan

3 Answers

Weres ignition switch located on 94 jeep cherakee


It is in the steering column,on top to the left,down about half way,drop the column down,and you will see it,it is kinda long,and has a rod going to it.

Jan 26, 2010 | 1994 Jeep Grand Cherokee

2 Answers

1994 ford tauris windshirld wiper switch


Remove plastic cover around column, three or four screw's, then remove three small bolt's on wiper switch same switch as turn signal there together, disconnect harness and remove and replace with new switch, there's no service to switch if bad it just get replace.Hope this was very helpful

Jan 21, 2010 | 1994 Ford Taurus

1 Answer

Blinker lever broken on a 94 toyota camry want to fix it


You will need to open the steering column so you can remove the old module and replace it with a new on. Typically there are 4 screws to be removed to open the column then 2 to remove the switch and install the new switch.

Sep 11, 2009 | 1994 Toyota Camry

Not finding what you are looking for?
1994 Pontiac Grand Am Logo

Related Topics:

798 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...