Question about 1992 Lexus Ls 400

1 Answer

Transmission not changing when lights are on

When I drive and press my brake the reverse light will illuminate and the car jerks once before it stops. But at night when the lights are on the transmission does not change out. But if you turn off the lights it drives fine.

Posted by on

  • eoliva8277 Nov 24, 2008

    When I drive and press my brake the reverse light will illuminate and
    the car jerks once before it stops.

  • bohomofo Jan 31, 2009

    When I press the brake R light on dash comes on . And car jerks right before coming to aaaA stop . I gave someone A jump and they crossed the jump wires sinc then .

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Wires are broken in the trunklid by the latch on the left common problem

Posted on Dec 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My car jerks going down the road its a 95 Buick century and it changes gears fine when I take off just stares jerking a few days ago


When you say it "jerks," this description could fit several actual symptoms. If by "jerks" you mean the engine misfires, it could be caused by the need for a major tune-up (including plug wires and distributor cap), or it could be a problem with fuel delivery, contaminated fuel, or defective components in the fuel system.
I assume the CHECK ENGINE light is on (and has probably been illuminated for some time now). Begin by doing a readout of the stored codes, and use the results to begin your diagnosis.
If by "jerks" you mean the transmission is slipping (engine revs but car slows down or doesn't accelerate), you have a transmission issue. If the transmission fluid and strainer/filter have not been replaced within the past 5 years or 50,000 miles, have a complete transmission service performed.
If by "jerks" you mean that the steering wheel wobbles or pulls, you have a problem with the front suspension.
If by "jerks" you mean that the car shudders or pulls when you apply the brakes, you need brake work.
I think I covered all of the "jerks." ;)

May 13, 2015 | Cars & Trucks

1 Answer

1999 Montero Sport XLS jerking into reverse. Error Code says change Transmission Fluid Temperature Sensor


Hi Sc, The job is labour intensive and may solve the problem. I wonder if the fluid in the tranny has ever been replaced? It's meant to be replaced at least once a year. If it smells burned have it replaced. Ask your shop to check the gearbox and engine mountings and in the event of your vehicle having rear wheel drive, the universal joints on the prop shaft. Regards John

Feb 23, 2014 | Mitsubishi Montero Sport Cars & Trucks

1 Answer

2001 grand am se jerking when changin gears trac off light on


Final drive speed sensor causing Trac light and rough shifting. Metal dust on the sensor. Have the transmission filter and fluid serviced. This should have been done at 60,000 miles. You may get an ABS light too. Service the sensor. Perform an OBDII scan for stored faults.

May 20, 2017 | 2001 Pontiac Grand Am SE

3 Answers

I changed the gear box of my 2007 corolla about 5 months ago. Then I noticed the car jerks or kind of pushes forward whenever i change my gear from park/neutral to drive or reverse. Please what do you...


A delay of more than a second in shifting from the neutral to drive or reverse gear, could mean that there is a problem with the transmission. If on changing from a neutral or park position to the drive or reverse gear, the car does not immediately catch the gear and move forward or backward, then it could mean a problem in the transmission. If you change gears, and you hear a sudden clunk or sudden jolt or shudder, then the shifting is not smooth and there could be a problem with the gearbox. If the engine rpm keeps increasing but there is no increase in the speed, then it could be a sign of the transmission slipping.Most automatic transmission systems, nowadays, have a check engine light or an OD light, which flashes if there is a problem with the engine.

Oct 01, 2011 | 2007 Toyota Corolla

1 Answer

Here are the issues with my 2000 Subaru Legacy L with 5 speed manual transmission: 1. ABS light illuminates when transmission is put in reverse and remains illuminated until car is turned off. 2. Reverse...


These assorted problems usually come from the control modules, in this case the transmission control module (TCM)
First, reset al ECM' by removing the battery negative terminal for a minute or so then re-fit it. This reset should cure all your problems. If not I shall consult my TSB's after you post the results of the reset.

Mar 24, 2010 | 2000 Subaru Legacy

1 Answer

1998 Dodge Dakota 4x4


fuel filter? fuel pump?

Sep 24, 2008 | 1998 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

918 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...