Question about 2004 Dodge Dakota
Blower motor worked only om high speed for a while, now doesn't work at all. I replaced control switch still didn't work. I ran 12 volt wire to positive side of blower motor blower ran fine. I checked for voltage on blower resister, no voltage. I checked for voltage on blower 12 volt wire 12 volts present. I automatically think, bad ground. I ran temporary body ground to ground wire on blower motor, blower ran high, but would not shut off. I am unable to find wiring diagrahm for blower circuit. Do you have any suggestions? It's cold here!
Replace your resistor if you haven't already. I had the same issue with mine, it only worked on high.
Posted on Dec 30, 2008
Tips for a great answer:
Jan 16, 2014 | 2004 Dodge Dakota
May 14, 2011 | 2001 Dodge Dakota
Nov 04, 2010 | 2004 Dodge Dakota
Feb 27, 2010 | 2004 Dodge Dakota
Jan 18, 2010 | 2004 Dodge Dakota
Jul 12, 2009 | 2004 Dodge Dakota
Jan 09, 2009 | 1996 Nissan Pickup
Nov 26, 2008 | 2004 Dodge Dakota
503 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: