Question about 2001 Chevrolet Blazer

3 Answers

Blazer stuck in 4 wheel high

The other day we got snow in Indiana where I live I put my truck in 4 wheel drive because the roads were icey, I went to put it back in 2whl drive high, the light blinks I hear some clicking in the module and the transfer case shift motor energizes under the truck, then it goes back to 4whl high. Im hearing poss. transfer case control module. Thanks hope you can help me. The vehicle is a 2001 Chevrolet Blazer.

Posted by on

  • DONALD
    DONALD Sep 23, 2014

    COULD YOU GIVE ME A PICTURE AND LOCTION ON THAT VEHICLE

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same solution with 2005 blazer......dont know how but this worked...........removed the courtesy lifgt fuse for approx. 10 minutes....put fuse back in and voila..able to shift out of 4 wheel drive

Posted on Apr 20, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Well I replaced the Transfer Case Control Module and the 4 button selector swith on the dash, and my 20001 Chevrolet Blazer Lt is still stuck in 4whl. drive high. Does anyone have any advice on this, Ive also already checked all fuses under the hood and in the truck, all are ok.

Posted on Nov 30, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 98 Answers

Had the same issue with a 2000 Blazer. It turned out to be the transfer control module like you said. Pretty good guess that's what's wrong with it. Been pretty cold here in Indy too...but we haven't seen but a few flakes so far. Hope this info proves to be useful! Have a nice night!

James

Posted on Nov 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I put the 4 wheel drive into gear on a 2500 hd silveraldo automatic


If its got the lever on the floor. put in drive, let the truck come to about 5mph and let it roll and pull lever to 4 wheel HIgh/never use low unless you get stuck (AND DON'T use 4wd ON DRY PAVEMENT,(TRY FOR A SECOND AND TRY TO TURN GOING SLOW AND YOU'LL SEE WHY,IT WILL RUIN YOUR TRUCK!)Don't keep your truck in 4wd unless you have to (FULL SNOW COVERED ROADS).If your truck is older, and your gonna be in 4 wheel drive for a extended time lock the hubs (if IT HAS THEM ,NEWER ONES WON'T)I had a 1994 silverado chyenne 2500 nice truck,wrapped it around a tree a week after I finished putting 7G's into it ,I loved that truck :'(

Feb 21, 2015 | Cars & Trucks

1 Answer

Trans troubleshooting


If you are driving in 4 wheel drive on hard surface then you have drive line torque lock up as there is no centre diff to allow the front and rear wheels to equalise out the torque . 4 wheel drive is for use when on dirt / snow / ice where the differences between the front and back are allowed to slip the tyres . Jack up a rear wheel and allow the torque to dissipate by rotating a wheel . A point from all 4x4 manufacturers is that you NEVER drive in 4 wheel drive unless you are on dirt or ice/snow conditions. You have probably been getting away with it as any bump that lifts a wheel from the road surface will allow the wheel to slip. Even running the tyre on the white painted line on the road or any wet patch on the road will help ease the torque loading

Feb 01, 2014 | Cars & Trucks

1 Answer

How does the 4x4 drive work


normaly you drive in 2 wheel dive rear whee lls driving jeep
when you select 4 wheel high or 4 wheel low you engage all 4 wheels bring intthe front axle and all 4 wheels drive high box for slippery roads ice snow etc
important low box only for extreme conditions such as heavy mud deep snow etc
LOW MUST BE SELECTED WHEN STOPPED OTHER WISE DAMAGE TO TRANSMISSION
hope this helps

Feb 04, 2011 | 2000 Isuzu Rodeo

1 Answer

When should i use 4 wheel hi on 1996 chevy k1500


use 4 wheel high only on slippery surfaces like icey roads dirt roads mud etc. can go as fast as you want [not recomended on slippery surfaces]
low is only for hard pulling like towing something up a hill or climbing steep grades

Mar 25, 2010 | 1996 Chevrolet K1500

2 Answers

Just got H 2 2005 4 buttons 4 the 4 wheel drive


Use 2 wheels, the other 4wd low ,for climbing at slow speeds: 4wd high, for driving on low traction roads,like mud or snow,at medium speeds: 4wd auto full time all wheel drive, for highway speeds on slippery surfaces, like rain or light snow.

Jan 12, 2010 | 2005 Hummer H2

2 Answers

On a 1999 pathfinder, what 4 wheel gear do I use in the snow


Unless your climbing big hills, I'd leave it in 4 high, for normal roads. If you happen to get stuck, better to shift to low, to get out, then when back on highway, or main roads use high. Remember, 4 wheel drive might get you out of the snow or whatever better, but it will slide sideways, and stop the same as 2 wheel drive, so don't think you can go faster than those ahead of you with 2 wheel drive, if roads are bad. Sorry, I know, you know better, but I see more 4 wheel drives in the ditches around here in Canada, than 2 wheel drives, in fact I've seen 2 beside each other in same ditch, as I slowed down for ice patch, and drove past them. Yes I did check to make sure they were o.k. though.

Dec 20, 2009 | 1999 Nissan Pathfinder

1 Answer

Stuck in 4 wd low


try backing it up first and make sure nothing is jamed in the linkage

May 25, 2009 | 1995 Chevrolet Blazer

1 Answer

How does 4 wheel drive work?


Hi there , in order for your 4 wheel to work you have to drive a couple feet for everything to lock. If you are already stuck and you put it into 4 wheel, it won't engage. hope this helps you out

Dec 29, 2008 | 1991 Ford F250

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

733 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...