Question about 2001 Cadillac DeVille

1 Answer

Fix lights in steering wheel - 04 DeVille

Some of the lights for the controls on the steering wheel are out. Do I pop the knobs off to access the bulbs, or is there another way to access them? 2004 DeVille

Posted by on

  • 1 more comment 
  • Anonymous Apr 03, 2009

    one of the lights in the steering wheel has gone out.. I understand that the light is in the switch, but does it just pop out with a screwdriver or is the a special way of getting the button out???



    I also have some lights out on buttons on the dash, is this the same fix???? the switch and light needs to be replaced??? and do these buttons just pop out????

  • Anonymous May 25, 2009

    lights on 03 deville steering wheel is out. is it a quick fix

  • yadayada
    yadayada May 11, 2010

    the bulbs are built into the switch's, u must replace the switch's to replace the bulbs.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

1 Suggested Answer

  • 16 Answers

SOURCE: fix lights in steering wheel - 04 DeVille

Steering wheel lights do not have bulbs you can change. The switch is a sealed asembly with an integral light. Each one costs around $110 at the dealership.

Heated seats have wires inside a fabric cover located betwwen the outside seat skin and the inner foam. Over time, they burn out. You can buy replacements from the dealer and have either them or an upholstery shop install them.

Posted on Mar 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove an SIR coil on 97 Deville/Technical drawing of steering column?


The clock spring assembly was most likely damaged during removal/assembly of the repairs. This assembly controls the airbag/horn/steering wheel functions. It is not that hard to change if you have a steering wheel puller to get the steering wheel off. Here is an exploded diagram. Hope it helps. The very top of the diagram is the clock spring assembly and it will be the first thing you see when the steering wheel is removed

remove-sir-coil-97-deville-technical-2weuas4jkbrvbhrwhonxf50x-2-0.gif

Nov 11, 2015 | 1997 Cadillac DeVille

1 Answer

Cruise control stopped working


You cant upgrade to HID lights on your car without the proper wiring right? Same with anything electrical in a vehicle if your vehicle didn't have all these extra buttons then your controlling unit for these devices are not compatible and not gonna work. Different units/different functions. You need to have the proper wiring harness for that wheel and the brain that operated all those buttons. Your airbag isn't recognized that's why you have the light on!!!

Apr 25, 2014 | 2004 Chrysler Sebring

2 Answers

How to remove steering wheel of 04 Pontiac gr Prix?


the bag is done just cut it out then there should be a center nut holding the wheel to the column unscrew and pop it out be careful when popping out the steering wheel the wire assembly should have a quick connect to separate.

Oct 25, 2012 | Cars & Trucks

1 Answer

What step are taken to remove a dash from a 1996 lincon towncarto access the a/c heater blend door actuator


what is the issue? May not be the blend door motor. Big job.

The climate control assembly has three control knobs (18519):
  • The airflow control or function selector knob controls vacuum and electrical applications.
  • The temperature control knob, attached to the potentiometer, controls the position of the A/C electronic door actuator motor (19E616) mounted on heater air plenum chamber (18471).
  • The blower motor control knob, attached to the heater blower motor switch (18578), provides four speeds of blower motor operation.
------------------------------------------------------------------------------------
A/C Electronic Door Actuator Motor Removal
  1. Disconnect battery ground cable (14301). Refer to Section 14-01 .
  1. Remove instrument panel (04320). Refer to Section 01-12 .
Instrument Panel Removal
  1. Position wheels straight ahead.
  2. Disconnect battery ground cable (14301). Refer to Section 14-01 .
  3. Raise vehicle on hoist. Refer to Section 00-02 .
  4. Remove RF wheel and tire assembly. Refer to Section 04-04 .
  5. Remove retaining nut in radiator coolant recovery reservoir area.
  6. Remove bolt retaining front fender apron (16054) to front fender (16005).
  7. Position front fender splash shield out of the way.
  8. Lower vehicle.
  9. Tag and remove wiring connectors.
  10. Remove retaining screw in parking brake control (2780). Remove parking brake control.
  11. Remove screw retaining instrument panel steering column opening cover reinforcement (04502).









  12. Remove steering column assembly. Refer to Section 11-04 .
  13. Remove from the LH and RH cowl side trim panels (02345).
  14. Remove lower cowl side trim panels.
  15. Tag and disconnect wiring connectors in LH and RH cowls.
  16. Remove ground wire assembly.
  17. Remove retaining rivet in the passenger side of the instrument panel (04320).
  18. Unsnap the instrument panel finish panel (04338), center and RH.
  19. Unsnap the instrument panel finish panel, (LH).
  20. Remove and disconnect the radio chassis (18806).
  21. Remove retaining screw in the instrument panel finish panel.
  22. Position the instrument panel finish panel out of the way.
  23. Tag and disconnect the wiring connectors.
  24. Remove retaining screw in the passenger side air bag module (044A74).
  25. Disconnect the electrical connector to the passenger side air bag module.
  26. Remove and disconnect the instrument panel upper finish panel (044A90).
  27. Remove instrument panel to cowl brace retaining screw.
  28. On Crown Victoria, Grand Marquis, remove screws retaining instrument panel finish panel (044D70) and remove instrument panel finish panel.
  29. Remove retaining nut on the instrument LH and RH lower finish panel.
  30. Remove instrument panel cowl brace (045D56).
  31. Disconnect vacuum hose on the harness assembly.
  32. Remove upper and lower screws retaining instrument panel finish panel to dash panel (01610).


  1. Disconnect the A/C electronic door actuator motor electrical connector.
  2. Remove four A/C electronic door actuator motor retaining screws.
  3. Remove A/C electronic door actuator motor (19E616).

Jun 14, 2011 | Lincoln Town Car Cars & Trucks

2 Answers

We're having a popping sound in the steering in my 2006 malibu maxx hatchback ? Is there a recall . Please help


i just bought a 2005 malibu maxx from a dealership. It was having a popping sound when i would turn the wheel back and forth. Had the dealership fix it. THEY said they replaced the ( rack and pinion ) for the steering on the car. Don't think there is a recall on that. GM had a lot of problems with that popping noise on their malibu maxx. Hope that might help.

Nov 09, 2010 | 2006 Chevrolet Malibu Maxx

1 Answer

Loose steering in 04 trailblazer


YOU COULD WORN WHEEL BEARINGS TIE ROD END LOOSE OR WORN OR YOU HAVE A LOOSE STEERING GEAR.THESE ARE YOUR POSSIBLE CAUSES LOOSE STEERING.

Mar 03, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

The dash and interior lights dont come on, I have no manual


There is a round knob to the left of the steering wheel. This is a light switch. If it's turned to the left, the lights stay off. In the middle, the lights come on when the door is opened or the key is removed. To the right, it will turn the lights on anytime. By default, it should be in the middle (automatic) position. At the center of this switch is another knob that will pop-out if you push it. By turning the knob that pops out, it will change the intensity of your dash lights. Try popping the knob out and turning it all the way to the right. Then push it back in so nobody messes with it. Then make sure the light switch stays in the middle position. Hope this helps.

Dec 23, 2009 | 2001 Pontiac Aztek

2 Answers

Fix lights in steering wheel - 04 DeVille


Steering wheel lights do not have bulbs you can change. The switch is a sealed asembly with an integral light. Each one costs around $110 at the dealership.

Heated seats have wires inside a fabric cover located betwwen the outside seat skin and the inner foam. Over time, they burn out. You can buy replacements from the dealer and have either them or an upholstery shop install them.

Jan 30, 2009 | 2001 Cadillac Seville

1 Answer

Replacing bulbs


well... it turns out the 04 is different.
check out this link. it may offer some insight. I understand the bulbd may be replaced in the switches, however you have to remove the aigbag to access....
http://www.cadillacforums.com/forums/cadillac-seville-cadillac-eldorado-forum/155255-steering-wheel-lights-out-2000-sls.html

Dec 28, 2008 | 2004 Cadillac Deville

Not finding what you are looking for?
2001 Cadillac DeVille Logo

Related Topics:

2,505 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...