Question about 1989 Ford Ranger

2 Answers

Not getting fuel to throttle body

How do i change fuel pump on 1989 ranger?

Posted by on

  • eddro Nov 24, 2008

    thx. But I need the procedur for removing tank

  • eddro Nov 26, 2008

    Thanks.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Make sure its not just the pressure regulater stuck shut might wanna change the fuel filter also cause it may have caused the pump to burn out prematurely by causeing the pump to work harder than it should

Posted on Apr 03, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 70,387 Answers

Drop the gas tank out and the pump is inside, it is part of the module that you remove once the retainer ring is knocked loose.

Posted on Nov 23, 2008

  • yadayada
    yadayada Nov 24, 2008

    Disconnect the filler neck at the tank nipple if so equipped, then with a floor jack in place under the tank removde the 2 straps holding the tank in the chassis, then drop it down slowly until you can reach the hoses and wire harness on the top of the tank, be careful not to do anything to create a spark after the fuel lines are removed or a serious fire and personnel injury may result.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 ranger i turn on the key the pump work for 30 sec and turn off


IT WOULD HELP IF YOU WOULD BE A LITTLE MORE SPECIFIC LIKE EX. SIZE MOTOR GAS/DIESEL WHAT PUMP FUEL PUMP ? SPRAY STARTER LUID INTO THE THROTTLE BODY IF THE TRUCK RUNS THEN WE ARE SURE NO FUELS GETTING IN CHANGE THE FUEL FILTER IT COULD BE EXTREMELY DIRTY IF AFTER YOUV'E DONE THIS AND YOU STILL CAN'T KEEP IT RUNNING DRAIN OUT THE FUEL AND TAKE OUT THE PUMP THE WIRES INSIDE COULD BE SCRAPING THE INSULATION OFF AND GROUNDING OUT IS THE FUSE BLOWN YES/NO IF NOT THE FUEL PUMP IS SHOT AND MUST BE REPLACED

Mar 14, 2015 | 2001 Ford Ranger

2 Answers

MY 2004 Ford Ranger engine turns over but wont start.


Are you getting fire?have you checked your fuel filter and coil pack

Dec 08, 2012 | 2004 Ford Ranger

1 Answer

1989 Ford f150 4x4 6cl When I go to start the truck it will start then I must keep pumping the gas peddle to keep it running if I let off it will die. Even when it is running it runs very rough


Check your fuel pressure to seeif it is high enough. Possible fuel pump or filter which some of those trucks could have up to three fuel pumps, one in each gas tank and a pump along the frame also. Could also be a vacuum leak or a suction leak at the intake or throttle body. Another possibility could be throttle positioning sensor. An easy way to check for a fuel related problem is to lightly spray carb cleaner onto throttle body while trying to start and see if it will continue running on that. If it does then you have a fuel problem. Use carb cleaner safe for fuel injection systems.

Sep 12, 2011 | 1989 Ford F 150

1 Answer

Throttle body is not getting any fuel but sounds like the fuel pump is working


ive got the same problem in my 87 chevy r10 from what ive read its the fuel pump i tried changing the throttle body, and the fuel injectors and it doesnt seem to be the problem im getting gas to the line but i dont think its enough pressure ill be changing the fuel pump and ill let you know.

Apr 23, 2010 | 1989 Chevrolet K1500

1 Answer

Where is the fuel injector located on a 4cycle ford ranger 4x4


I'd guess with a 1989 you have throttle body fuel injection, which means that the "injector" is in the metal part that would be where the carburator used to be. Old cars had the air filter on top of the carburator.
you really can't see much of it.

Nov 18, 2009 | 1989 Ford Ranger

1 Answer

My engine is not geting fuel to it. I changed the Fuel pump, filter, and strainer


have you changed the fuel pump in the tank or the lift pump? Is your cables attached prperly to the throttle body?

Aug 06, 2009 | 1992 Ford Ranger

2 Answers

1989 truck stalls when hot.


Have you chg. fuel filter? If so, best to do a fuel pressure test, sometimes( not always) when the pump gets warmed up they can loose a little pressure and thats all it takes just a few # under recamended p.s.i and the truck quits running, you may hear the pump run but its not putting out the correct pressure until it cools down and it starts working again, but after a while quit all together.

May 27, 2009 | 1989 GMC K1500

1 Answer

Truck wont start


check the injector relay and the injector fuse if they are good you might want to make sure the computer was programed right. and check to see if the injectors are getting a signal from the ecu

Jul 07, 2008 | 1989 Chevrolet K1500

1 Answer

Fuel pump


With a vehicle that old I think you should retrofit any pump that matches within reason the original specs as with throttle body injection fuel pressure is critical. If it is the same as South Africa the agent will sell you any **** to get rid of you. Try fitting a Bosch pump with a pressure regulator (set it to spec ). Please change the filter.

Jun 10, 2008 | 1989 Nissan Hardbody King

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...