Need the belt diagram for the water pump belt for a 95 Auroa
Iv'e looked under the hood and all and there are no diagrams there i need the diagram for the water pump belt, engine if anyone can assist me with this would be great and also with a regualr GM puller will it take the pully off the cam shaft?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
No diagram but it goes over the power steering pulley, going ccw, under the top idler (back of belt on pulley), over the ac compressor, over the alternator, up over the fan (backside of belt on pulley), around the crank pulley, over the water pump (back of belt on pulley) then you're back at the ps pump. It's tightened by loosening the pump pivots and using the long exposed jack screw below the pump to move it.
If you open the hood and look around the frame of the engine compartment, or on the under side of the hood, there should be a diagram available that shows the way the belts are run on your cougar. It will show you the alternator, water pump, power steering pump, crank pulley, tensioner, A/C and any extra pulleys.
Usually it is located somewhere above the crank pulley a bit to the left or right.
belts just dont fall off. you need to find out why. ck tensioner pulley, tensioner and water pump. there is unsually a diagram under the hood. I think if you find the DAYCO website they have belt routing diagrams.
Look under the hood. Somewhere is a belt drive diagram. If you cannot find the belt routing sticker then you might just have to go to the parts store and have them order the manual for you specific car.