Question about Honda Accord

1 Answer

My friend tried to replace my spark plug cables, and took all the cables out at once instead of replacing them one by one, and now the car wont start. we think they're wired wrong. i think i found the wiring order, but if i could just double check, and possibly get a diagram or a picture to help ensure they're put back on correctly

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 193 Answers

Contact the autozone parts store and they will help with printing out a picture. The order should be 1-3-4-2, distrubtor rotation going in a clockwise directio

Posted on Nov 23, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chrysler p t crusier cranks but will not start?


Check engine light should be on. Get a scanner tool and check what cars computer says. I believe you will find problem to be a bad crankshaft or camshaft sensor. Good Luck Friend.

Mar 31, 2018 | Chrysler PT Cruiser Cars & Trucks

1 Answer

My 2000 chevy blazer will file but wont start sometimes


not knowing the condition of you suv, replace fuel & air filters, very important, replace distributor cap & rotor, spark plugs & plug wires. that should do it, good luck

Mar 10, 2013 | 2000 Chevrolet Blazer

1 Answer

Beetle oil leaking into spark plugs


Replace the valve cover gasket and spark plug seals.

Jul 06, 2017 | 1999 Volkswagen Beetle

1 Answer

My daughers 1999 altima ran out of gas, we put gas in it, & it still wont start, we replaced the rotor cap & spark plugs, it getting plenty of fuel but still wont start, what can it be?


Hello you will need to replace the spark plugs you quoted it is getting lots of gas so your spark plugs are wet.disconnect your battery while your replacing your spark plugs once finished replacing the spark plugs reconnect the battery now try to start it should start up.

Jan 10, 2011 | 1999 Nissan Altima

1 Answer

No spark at spark plugs


dear friend-my feeling is that we have a faulty crank angle sensor,have it tested or replace

Jul 18, 2009 | 2000 Hyundai Accent

1 Answer

1991 Honda Accord engine cranking but not turning over


check coil. resistor, if the car shuts off when you take a battery cable off its the alternator. timing is off

Apr 04, 2009 | 1991 Honda Accord

1 Answer

Need the spark plug cable order for2000honda accord lx 4cylinder


The firing order is; 1-3-4-2 and the rotor moves in a counterclockwise direction. Turn the crank shaft and set the engine at TDC (top dead centre). This ill set the rotor arm pointing at No1 cylinder. From this point you can replace the HT leads in the above order.

Nov 23, 2008 | 2000 Honda Accord

1 Answer

Need the spark plug cable order for2000honda accord lx 4cylinder


1342 most engines some fords 1432 six pots 153624

Nov 23, 2008 | 2000 Honda Accord

1 Answer

My hyundai santa fe


Hi! i think you must describe more problem symptoms;
DESCRIPTION The starting system includes the battery, starter motor, solenoid switch, ignition switch, inhibitor switch(A/T), ignition lock switch, connection wires and the battery cable. When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil. The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear. The contacts close and the starter motor cranks. In order to prevent damage caused by excessive rotation of the starter armature when the engine starts, the clutch pinion gear overruns. http://hmaservice.com/viewer/dispimg.asp?path=/data/Passenger/HY/HMA/ENG/SHOP-images/HY-SM13-IMAGES-ENG/ebkd010a.gif INSPECT SPARK TEST 1. Remove the spark plug cable. 2. Using a spark plug socket, remove the spark plug. 3. Remove the ignition coil. 4. Install the spark plugs to each spark plug cable. 5. Ground the spark plugs. 6. Check is spark occurs while engine is being cranked. 7. Using a spark plug socket, install the spark plugs. 8. Install the spark plug cable and ignition coil.

May 24, 2008 | 2002 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...