Question about 2000 Nissan Maxima

2 Answers

2000 maxima won't stay started on a cold morning

My 2000 maxima has a problem starting, in the summer it starts and runs ok ( bad gas milage thou) but when it starts getting cold it it won't stay started in the morning. i will start it then it will idle down and quit, it won't stay started unless the engine is completly warmed up. i have changed the idle air control valve, mass air flow sensor and none of these have solved the problem please help.

Posted by on

  • 1 more comment 
  • meanqueen Nov 27, 2008

    my 2000 nissan maxima wont stay running until the engine is completely warmed up either. when i push the gas to try and warm it up it doesnt rev up, it feels stiff.

  • eniopacheco Jan 22, 2009

    i replace mass air flow and idle control idk what to do some 1 help plz

  • Anonymous Mar 16, 2014

    firs thing when the problem came to me. i had cleand the throtle boddy of my car together with my mass air flow sencor. then when i start up my car the idle keeps on looping. so i tryed to check it with a obd diagnose kit it shows that there is a problem on the air control. so i am asking sugestions how to fix it

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Nissan Expert
  • 99 Answers

Have the plastic intake manifold and gasket replaced. I have posted this fixed at least once before and have seen it numerous times.

Posted on Nov 29, 2008

  • Tom Wagner Mar 11, 2012

    This what I did after the dealer had it for 4 days and founfd nothing. They wanted to change the lower gasket even afetr I told them it was the upper one. Fortunately the only charge $125.00. The bad news was that it took me 10 hrs. But that was becasue the manual that I used didn't tell me about and / or how difficult some of the boltsd are that helfd the plenum in place and I rarely work on vehiclkes. If I had to do it again, I could do it in 5 hrs easy. . I laso stripped 3 bolts trying to tourgue them to spec. To fix this I ground down the brass bushings in the plenum so the bolts wojuld bite better.

    In any case, the problem was solved

    Thanks to Jackson as he saved me $800

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Engine wont start replaced crankshaft sensors camshart sensor getting fuel spark

Posted on Dec 07, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1996 Nissan maxima shuts off as soon as it starts.


Hi Brent is the MIL light on? if yes check the code and go from there. To me it sounds like the MAF mass air flow sensor issue.
Let me know. You say the vehicle starts then shuts down
correct?

Oct 25, 2016 | 1996 Nissan Maxima

Tip

Poor gas milage?


Thinking you are getting poor gas milage,Your engine is running smooth,no misses,Engine runs smooth while accelerating up a hill, Still poor gas milage, Check your tire pressure. I have a 1999 Chevy Blazer 4x4, 4.3 Ltr. Auto, loaded. I have just over 154000 miles on it,I change my fluids every 5000 miles. Summer driving milage got real bad. I drive a Blazer hard. I tow a 16ft trailor usally loaded to the top with wood. Tires get hot in the summer, while in the winter, they stay mostly cool. Always check your air pressure.Most vehicals are equipted with radials now days, So if you think a tire looks low, check it, Usally they low. Usally in the winter months, nobody checks tire pressure. It really does make a difference. I went from 17.2 MPG to 19.5 MPG, while pulling the same trailor loaded with wood. I cut my own wood then stack it in my trailor to sell. I have Good Year Wranglers size: P235/75R/15 I just replace these with new ones. The old ones are going on my trailor. Counted milage on tires are 65000 Miles. Tires were rated at 40000 miles, Under normal use.

on Jan 01, 2010 | Chevrolet Blazer Cars & Trucks

1 Answer

95 maxima starts ok but when you accelarate it won't go over 2000


This sounds like a transmission issue. Assuming it's an automatic transmission, check for lack of fluid that is causing the slipping. Also, if the fluid level is good but is a dark brown and gives a burned smell, it needs to be changed. Before changing the fluid and filter, bring the car to a transmission shop to ensure you aren't throwing good money after bad by changing the fluid in a bad transmission.

Mar 30, 2012 | Nissan Maxima Cars & Trucks

2 Answers

My Nissan maxima 98 won't start in cold morning


check the temperature sender for your fuel and emissions (not same as sender for gauge is most cases) if fuel injected, if carburated check choke. also ensure plugs and wires are in good shape

Mar 14, 2012 | 1998 Nissan Maxima

1 Answer

Try to start run for a second if you press the gas it will stay on until you get off the gas


Sounds like a leaky injector, bad idle ,hard to start when warm, bad gas mileage. Or the temp sensor both of them that won't let it run rjght when its cold

Nov 09, 2011 | 1997 Jeep Grand Cherokee

1 Answer

Car won't start and stay running at first start-up. then after 10 to 15 minutes it starts and runs fine.


Hi. Sounds like the gas filter. If this happened in the summer it would be pressure lock in the gas tank.

Aug 15, 2011 | 1995 Honda Accord

2 Answers

2000 nissan maxima won't fire when trying to start. it turns over but won't fire. it started once and ran but won't start again


sounds like it might be flooded. Try and remove the fuel pump fuse from the fuse block that is just in front of your left knee. While it is out crank the car and see if it wants to start and hold down the gas pedal all the way and then relase it and back and forth and once you get it to run have the fuse ready in your hand and in front of the spot to install it. and then keep the rpm's up with the gas pedal until the smoke clears out behind the car.

Jul 02, 2011 | 2000 Nissan Maxima

1 Answer

1998 GMC Savana 3500 5.7L. Truck starts ok when cold. After running, very difficult to start have to pump the pedal and hold to the floor. Fuel pressure jumps to 62psi when pump runs, drops to 58 and holds...


HOW MANY MILES ALOT IT REALLY SOUNDS LIKE YOUR O2 SENSOR OK LOCATED ON THE EXAUST PIPE CLOSE TO ENGINE UNDER THE HOOD THEY CONTROL YOUR FUEL MIXTUER FOR HOT AND COLD LIKE A CHOKE . IF ITS BAD THE ITS FLOODING IT OUT WHEN HOT AND YOU GET ROTTEN GAS MILAGE BECAUSE YOUR FUEL PRESSURES ARE FINE REGULATORS EITHER WORK OR THEY DON'T AND IT THEY DON'T YOUR TRUCK WON'T RUN O2 SENSORS GOING BAD DON'T ALWAYS GIVE A CODE OR A DASH LIGHT BECAUSE OF THE BAD GAS MILAGE AND BLACK SMOKE WHEN IT IS WARM ITS PRETTY OBVIOUS WHAT IT IS OK GOOD LUCK POHLCAT

May 03, 2011 | 1998 GMC Savana

Not finding what you are looking for?
2000 Nissan Maxima Logo

1,363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

81423 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...