- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try not putting fuel nozzle in so far. Fuel flow cuts off on back pressure of the air being displaced by the fuel when filling. Can be a problem with narrow neck tanks and some fuel fillers are more sensitive than others.
Gas as in gasoline or gas as in LPG gas? If its petrol, the fuel sender may be out of adjustment. (Usually means a new sender) If its LPG, the fuel stations are set to automatically shut off at 80% full. The gas tank will never actually be full to the brim but the gauge should be showing full if the gas nozzle keeps shutting off. Have a look on the LPG tank itself, they have a little gauge on them which shows how full it is. I have 2 tanks on my car , when "full" or when the pump shuts down, the tank gauges show just under full but the gauge on the cars dash shows full (2005 BA Ford)
This is not a bad thing. You have a very tight emissions system. You know your car at this point better than anyone else. You can try this, don't put the gas nozzle very tight into the gas filler. Put the nozzle into your tank and just pull it out a fraction of an inch. This will give the fuel tank the ability to BREATH while your filling the tank .This should solve your problem. GOOD LUCK.
SOUND LIKE EVAP CONTROL SYSTEM NOT WORKING.COULD HAVE STOPPED UP FUEL SOAK EVAP CHARCOAL CANISTER.OR THE PURGE SOLENOID NOT WORKING ALSO GAS CAP COULD BE FAULTY.HAVE THE EVAP SYSTEM CODE SCANNED.WHEN PUMPING GAS EASE THE GAS SPOUT OUT JUST A LITTLE SO YOU CAN PUMP GAS IN TAKE.REASON CAR WONT ACCEPT GAS BECAUSE EXCESS GAS VAPORS CAUSES PRESSURE TO BUILD UP IN FUEL TANK IN WHICH WILL KEEP GAS FROM BEING PUMPED IN FUEL TANK.
There is an anti-syphon screen in the filler neck of the gas tank. They do not have very large openings and the slightest debris will act like it is blocked. EIther have the screen replaced or completely removed, or don't put gas nozzle completely in the hole
There is a filter on the tank vent that is plugged. It is not letting the air escape from the tank during fillup causing positive pressure which will will shut off the gas pump. I don't know where it is on your model but some are under the back behind the fuel tank. It is usually a 6" square plastic box with a hose on it and louvers on the sides.