Question about 2000 Ford Focus

1 Answer

The heater has stopped working on my ford focus zetec 2000,

The heater has stopped working on all settings, how can i test it???

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 98 Answers

The first thing I would do would be to check the fuse panel to see if perhaps the blower motor fuse has blown. If you are unsure of the fuse panel location or which fuse it is, your owner's manual should have a section in it that shows a complete diagram of it and labels the function of each fuse. Chances are, that's where your problem will lie. If that doesn't fix the problem, the next step will be to remove the dash cover and gain access to the heater controls to make sure that all appropriate wires and connectors are in place and that the switch is allowing voltage to pass through it when turned on. I believe this should solve your problem. Have a great day!

Posted on Nov 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The cigar lighter doesn't work in our ford focus zetec w reg we have replaced the fuse and still no joy could it be anything else


Hi Andy
You will need to use something like a 12volt test lamp to touch the terminal in the centre of the barrel. Carefully. Dont want to cause a short. Use tape protect test light probe.
If you own a car then a 12v test lamp is a handy tool or a cheap MultiMeter

Jul 05, 2015 | 2000 Ford Focus

1 Answer

Timing Diagram of 2000 Ford Focouse DOHC 2.0 Zetec


If you Blew off the timing belt then need Head work also since it is an interference Motor
meaning that the Valve train and Pistons Have no Clearance so U are going to need a lot more work than just a timing belt to run

Mar 31, 2014 | 2000 Ford Focus

2 Answers

Need to know where the cylinder head temperature sensor is on a 2000 ford focus with a 2.0 zetec engine


It should be on the driver's side of the head in the heater hose or tube, there should be two of them, one for the computer and one for the temperature gauge. Good luck.

Jun 25, 2010 | 2000 Ford Focus

1 Answer

Is a ford focus non zetec interchangable with a zetec motor


If you mean can you drop in a replacement zetec engine then yes. As far as parts, yes it is as well. The differences mostly pertaining to the ECU and electrical sensors.

Feb 28, 2010 | 2000 Ford Focus

2 Answers

Focus 2002, A/C fan does not work on settings 1-3


common problem, replace the blower motor (fan) resistor, this is what controls the fan speed,its located on heaterbox next to blower motor.heres a picture of it,its on the rightside of dash toward the bottom. hope this helps.852ab4f.jpg

Feb 19, 2010 | 2000 Ford Focus

1 Answer

I have a 54 plate focus zetec,after driving for 40 miles a clunking noise starts and when i stop the car seems to want to cut out.could this be a cooling fault


havent a clue without checking it out with a test drive ,but it sound like its well sick .Does it have oil??

Sep 28, 2009 | 2000 Ford Focus

1 Answer

What are the spark plug settings for a 1.8 zetec engine


you can set the gap by using the new spark plug casing papar thikness.try it and it will work

May 24, 2009 | 2000 Ford Focus

1 Answer

Rear wiper stopped working on my 2000 1.6 Focus Zetec auto


IF IT IS A HATCHBACK(3DOOR)THE WIRING FROM THE HATCH TO THE BODY BREAKS.BUT IF THE MOTOR WAS GOING SLOW THEN STOPPED.SOUNDS LIKE THE WIPER MOTOR IS BAD

May 05, 2009 | 2001 Ford Focus

3 Answers

Trip meter reset in Ford Focus Zetec 2003


You have a blown fuse in the interior fuse block I can't remember the number. Use a test light to check them

Aug 16, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2000 Ford Focus Logo

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

71338 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...