- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To get at the speaker, you need to remove the rear window shelf trim panel -
Remove rear seat lower by lifting from front;
Remove bolts holding rear seat back and remove seat back; Remove the seat belt retractors;
Remove the push in retainers from the cross car beam;
Lift up on the front of the shelf panel to disengage the hook and loop material; then do the same at the rear of the panel, and pull out the shelf.
The speaker is now accessible for removal.
Look in your manual to see if the seat does come down, and how to do this. If not remove the bottom half of the seat by pressing the seat torward the trunk and lifting. Then you will be able to access the bolts to remove the back rest portion of the seat. However some times you can replace the speakers through the trunk.
I replaced my rear speakers I had to remove the entire rear seat bottom and top as for the bottom just pull up theres nothing holding it down just a few body clips like the ones that hold the door panels in place
To remove that whole lid you need to remove the rear seat. the bottom half just pulls up and out and the back side pieces have two bolts down low, one on each side, then you can remove the rear seat back and that lid should be held in place with either bolts or push pins. The lid should come out and give you access to replace the speaker grills.
you have to remove the seat, remove the lower part first, it snaps in, then remove top part of seat, then you will see the pop in fasteners that hold the rear deck. if you have a problem go to this web site it will help with step by step instrucations. hope this is helpful. chttp://www.crutchfield.
It's really easy to remove the rear speakers. First, get in the trunk and find the 3 white anchors for the rear deck-they're near the rods for the trunk mechanism. Push them through the metal frame to free the deck. Next, you have to get in the back seat and remove the stop light from the deck. To do this, push in the pins on the locking mechanisms on either side of the light to free the back casing. Pull the pins out and the casing off. Next, undo the two bolts holding the stop light in place and pull it off-don't forget to undo the wiring harness. Next, find the three anchoring points for the back seat. Gently lift the two side ones free of their anchors. This gives you access underneath the deck. Free the deck and gently lift it over the seat. You'll have to jimmy it a little to get the locking clamps free--they're all along the back of the deck. Pull it free and you have access to the speakers. I believe the factory speakers are 5 1/4 inches Try to use Toyota speaker adapter plugs so you don't need to cut wires and mess the electric system up. You can get them from Ebay or Amazon. cheers