Question about 1996 Chevrolet Cavalier

1 Answer

Where is the driver side power window cicuit breaker.

Driver side power window on 96 cavalier sometimes stops working half way up or down. While window does not work I put volt meter on window motor leads and I get around 4 volts. I have 12 volts at rocker switch. I get 12 volts at window up pin on rocker. I get 12 volts on window down pin on rocker. Somewhere between rocker switch and window motor leads Im losing voltage. Only thing I see on Chiltons electrical schematic is a cicuit breaker. Does anybody know where it is located.

Posted by on

  • yadayada
    yadayada May 11, 2010

    This is not a circuit breaker issue, period.

  • Anonymous Mar 30, 2014

    The 12 volt stopped working. Other electrical is, just no 12 volt. It was working and when we plugged it to the power it stopped working.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Check the wireing to the window motor an at the conector as well where it comes thru the door =- i have seen them break there an its covered === also check the circuit breaker in the fuse pannel position number 16 in the breaker for the window motors ok
dennis

Posted on Dec 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1989 s-10 blazer i put new window switches in the driver side window goes down but you have to wait to go up slow the pasenger side switch wont work at all they have window locks the driver side...


Recheck your wiring, sounds like wiring ins't right to me....Maybe a cut or pinched wire some where....There is a chance the window motors are bad also...I hope you find the problem, my 96 would not roll back up after going down turned out to be the motor on drivers side was bad...Good Luck....

Feb 27, 2015 | 1989 Chevrolet S-10 Blazer

1 Answer

96 ford thunderbird power windows


YOU NEED TO CHECK THE CUIRCUT BREAKER USUALLY LOCKATED IN THE FUSE BOX

Apr 11, 2012 | 1996 Ford Thunderbird LX

1 Answer

Rear windows won't go down


You also have Circuit Breakers for your windows, Or your Master Switch ,You can Test the Driver Control Switch or the rear switches by removing the Switches and using the connector Plug and a Jump wire try jumping accross the wires,if they go up or down you could have a Bad Switch,if nothing moves more than likely your Window Motor is bad. BUT first CHECK your Circuit Breakers ,It could be Labeled as accessery Relay or circuit Breaker.

Jan 02, 2012 | 2004 Lexus ES 330

2 Answers

I have a 2003 cavalier. I have power windows. The passenger side window although slowly does go down. When closing the window it will go up stop then after giving it several minutes goes up a little...


Maybe your motor just need the connections taken off and sprayed down with wd/40 to help the connection. Is this happening on the driver side? if so try useing the passenger side button and see if it opperates same way, it;s a different window motor> good luck to you.

Mar 28, 2011 | 2003 Chevrolet Cavalier

2 Answers

Driver side power window doesn't work. The passenger side worked for a while then, it stopped working also. I found thecircuit breaker box and pushed in the breaker for the windows. Now, the passenger...


No I would think a 20 year old van needs a drivers side window motor ,,Its the most used window in the Van, also a new window switch to control the motor

Mar 13, 2011 | 1995 Pontiac Trans Sport

1 Answer

The power window on the passengers side stopped working. I tryed to check the fuses and breakers, but couldnt find either one. Question: is there one and I am just missing it? Drivers side works fine. It...


Probably motor and regulator, if you tried both switches on driver and passenger side suspect both window motor and regulator on passenger side sometimes while pressing the switch on the passenger side bang on the door panel inside and sometimes it may move if it does then suspect only the window motor.

Oct 11, 2010 | 2000 Dodge Caravan

1 Answer

1998 chavy Cavalier-all windows but drivers side dead


you have to run a power wire to the motor in the door and press up on the window button it should go back up if not then you need to change the button hook up or the motor

Mar 17, 2010 | Chevrolet Cavalier Cars & Trucks

1 Answer

96 Camry Power Window problem


the power windows of most toyotas only works if the master switch located on the drivers side is good. remove the master switch check for burned traces on the printed circuit board. solder a jumper wire across the burned part and it should work

May 30, 2009 | 1989 Toyota Camry

2 Answers

96 cavalier driver power window dont go up


Spray silicone (lots) down along the guides (where felt is ) at the ends and see if that doesn't help. Try to work it up and down a few times.

Jan 13, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1996 Chevrolet Cavalier Logo

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...