Question about 1996 Jeep Cherokee Sport

1 Answer

High beam not working . comes on sume times.shows on dash that its working? alternater sliping/ new in OCT 2007 and new belt?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I would seriously consider replacing the bulbs, both high and low beam as they are interconnected and may cause the symptoms you are experiencing. Also check all other lights and replace if burned out. It usually worked for me, if not then you are in for more complex troubleshooting. Hope this helps.
Alex

Posted on Nov 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1999 Toyota Camry . Low beams work, but no high beam.


I would guess the switch on the steering column
is worn out,thus no high beam feature

That switch & that part of the lighting system has to be tested

Best if you have wiring diagrams & electrical skills

As with almost all folks that come to any web site, I assume
everyone ends up at a repair shop,because no one says otherwise

May 10, 2014 | 1999 Toyota Camry

1 Answer

99 S10 high beams work, but low beams don't.


Do you have power in and out of the dimmer switch in the low beam position ?

Feb 15, 2014 | 1999 Chevrolet S-10 Pickup

1 Answer

Is my 2007 Lincoln Navigator (HID headlights) equipped with HIGH BEAMS? If so - they don't seem to work. Allow me to explain; 1. The headlights come on automatically in low light conditions. 2. The...


First of all are your headlights a double filament type headlight? If yes then I would suspect that a power wire to the high beams is broken or shorted. If your high beams are a separate set of lights from your regulars running lights then either the high beams headlights are missing. or has a broken power wire or shorted or...You could check the fuse box under your dash and under the hood of the car to see if you have a fuse for the high beam lights.

Oct 28, 2013 | Cars & Trucks

1 Answer

Im having aproblem i was diving and my battery light came so i had the alternatator checked and battery the only time it comes on is when accelerating and the other night my high beams quit working all...


if alternator is shorting out at high temp,even when it is cked they sometime have bad diodes that will short out at higher temps.i would still replace alternator

Jul 30, 2011 | 1994 Chrysler Concorde

2 Answers

What is the DRL warning light on the dashboard of my 2007 Honda CRV?


On my 2007 Honda CR-V The DRL code appeared on the dash board. Additionally I had only one high beam (on the passenger side); both low beams were fine, but I did not have a Daytime Running Light on the drivers side. The DRL code was really misleading because the real problem was that the high beam element in the headlight bulb was burned out. Note that the daytime running light is not a seperate bulb -- it is the high beam element which is powered at a low voltage. Once I replaced the head light bulb everything worked fine and the DRL code on the dash board was gone. So if the DRL message appears what you really need to do is replace the headlight bulb (there are YouTube videos which show how to do this - but search for headlight replacement, not for DRL fix). Be careful not to touch the new bulb with you hands since premature burnout can occur from the grease off your skin. I got my bulb from Wal-Mart for $8.88 (it's a 9003/HB2 for the 2007 CR-V) -- that's a pretty cheap fix.

Feb 27, 2010 | 2007 Honda CR-V

1 Answer

2007 toyota corolla high beams won't work when I pull the lever to switch from lo to hi--fuses all look good--blue indicator light (on dash) to show hi beams are on won't come on either


switch or fuse remove fuse and replace one same amp
maybe both high beam in bulbs blown
but blue light not coming on would say a fuse or switch faulty

Feb 22, 2010 | 2007 Toyota Corolla

2 Answers

High beam headligts will not come on + no dash


Sounds like a bad switch to me. If it was a relay,it would not work period.Not to mention, the switch controls the dash lights too.

Jun 22, 2009 | Mazda MX-6 Cars & Trucks

1 Answer

Headlights


posted by billie109 on Oct 01, 2008 Report abuse
All at once my dash lights showed me problems with my brakes and battery.
However, I found a loose wire on the battery which I fixed, and that didn't solve the problem.
I also noticed that my head ligjhts don't come on automatically when I start the engine, nor do my high beams come on.

Oct 01, 2008 | 2003 Kia Sedona

1 Answer

DRL and High Beam do not work right on Honda Accord EX 1998


Some time back I found some data on a similar website suggesting that the Day Light Running circuit board, just under the steering column, developed cracks in some of the soldered joints. Your high beams should also be affected with loss of day light running lights.
Resoldering repaired the continuity of the circuits. Ours is now working quite reliably. Some of the defective areas developed slight brownish discoloration, that's how I was told to recognise the areas to be resoldered. Hope this will help you solve your problem.

May 24, 2008 | 1998 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...