Question about 1998 Dodge Caravan

1 Answer

Blower will not switch to defrost,floor,just vent,no heater

Had to change the inside air conditioning condenser, finally got it all back together and air works fine, but the blower only blows out the vents, does not switch to defrost, floor or mix and can never get any heat it always blows cold air.any idea what is wrong???
Thank you

Posted by on

  • 1 more comment 
  • Anonymous Mar 12, 2014

    My wifes G5 blows air so blower is working but no heat comes out. I have no fluid loss at heatercore that I can see. I mean no water on passenger floor board

  • Anonymous Mar 19, 2014

    can't get heat to come out floor vents or defrost vents

  • Anonymous Mar 30, 2014

    frost on outside of heater box-won't blow air-I let go overnight, now seems to work ok ?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

You did check for vacuum lines off, or wiring harnesses not plugged in all the way, or at all didn't you? Did you pay someone to do this, or do it yourself, because if you paid someone, have them look at all the connections .

Posted on Nov 23, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What part controls switching air/heat from defrost to bi-level to floor & where is it located?


In the attached drawing, Part 32 moves Part 26 to direct the air flow to the desired locations. It uses vacuum to operate. The actuator may be bad or the vacuum hose my have come loose when the heater core was changed. With the car running but the blower off stick your head up under the dash on the passenger side and see if you hear a hissing sound. If so it's probably just a vacuum hose come off.
AIR CONDITIONING AND HEATER UNIT BODY Fits DYNASTY LASER LEBARON NEW...

Dec 24, 2014 | Cars & Trucks

1 Answer

Why is hvac air coming from all three locations (vent/floor/defrost) regardless of switch setting?


Check air box if it won't change air flow some thing is wrong there inside the car

Jul 14, 2014 | 2000 Buick Regal LS

1 Answer

Heater and Defroster not blowing air


check vent flaps inside the blower unit....

Nov 24, 2013 | 1996 Mitsubishi Mirage

1 Answer

1996 Montero Heater Blower not working


I assume your heater setting is electric control, if so either your defrost and floor heat switch failed or wire problem. For the air not hot, check the heat control valve on the top of the hose it should be in front of the firewall. I don't know your car is using mechanic valve or electric control valve. Anyway check there first. Good luck.

Nov 24, 2013 | 1996 Mitsubishi Montero

1 Answer

Air blows out all vents no matter where it is switched to heat or ac defrost, floor


its called the blend door actuator
its either stuck or or broken or shorted out it is deep in behind the dash located inside the air box where the heater core is and the ac condenser is its a fun job as for you have to rip your dash apart

May 18, 2013 | 2006 Kia Sorento

1 Answer

Air conditioning will not switch from defrost vents


Vacuum control motors are used to position these airflow control doors.
SECTION 412-01: Air Distribution and Filtering 2000 Expedition/Navigator Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 06/17/1999 Air Distribution There are two sources of air available to the air distribution system:
  • outside air
  • recirculated air
Recirculated air is only used during MAX A/C, AUTOMATIC (if equipped with EATC) and OFF modes.
Air distribution within the vehicle is determined by the function selector switch position, if equipped with manual A/C, or is controlled by the electronic automatic temperature control system in the AUTOMATIC mode but can be overridden by the driver if desired. Airflow control doors are used to direct airflow within the heater air plenum chamber. Vacuum control motors are used to position these airflow control doors.
The air distribution system is designed to provide airflow from the defrost nozzle when no vacuum is applied to any of the vacuum control motors. This is done to prevent a situation where defrost cannot be obtained due to a system vacuum leak.
Air enters the passenger compartment from the:
  • instrument panel A/C registers.
  • heater outlet floor duct.
  • windshield defroster hose nozzle.
  • side window demisters.
  • rear seat airflow duct (if equipped).
Passenger compartment air is exhausted from the vehicle through open windows or cab air vents.


expedition air flow hvac system-xvcmtr1jbqa4kfrdszeh0lpe-3-0.gif Item Part Number Description 1 18A318 Vacuum control motor - panel/defrost door 2 18A478 Panel/defrost door (full vacuum position) 3 - Defrost airflow 4 - Side window demister airflow 5 18B545 Temperature blend door (full heat position) 6 19860 A/C evaporator core 7 19A813 Air inlet duct door (full vacuum position) 8 - Outside air inlet 9 18A318 Vacuum control motor - air inlet duct door 10 - Recirculated air inlet 11 19805 Blower motor 12 - Vacuum to emission control 13 - Vacuum from the engine intake manifold 14 19A563 A/C vacuum check valve 15 19A566 A/C vacuum reservoir tank and bracket 16 19B888 A/C-heater function selector switch 17 18476 Heater core 18 18A559 Floor/panel door (full vacuum position) 19 - Floor airflow 20 18A318 Vacuum control motor - floor/panel door 21 - Panel vent airflow
Check vacuum control to the panel defrost motor ( vac,diaphragm )

Nov 01, 2017 | 2001 Ford Expedition

1 Answer

2006 chrysler pacifica air blinder not work only the vent for heating are blowing air i can't get it to switch to defrost or floor vent Could this have something to do with the blower relay switch...


the blower relay switch controls the blower motor,this sounds more like an air blend switch on the heater control head on the dash,not making the switch over in that switch.it could be the air blend door motor on the heater duct under the dash on the passenger side.this can be checked with a scan tool that has the capability to communicate with the bcm computer on this car.

Mar 17, 2011 | 2006 Chrysler Pacifica

2 Answers

The air conditioning does not blow through front vents but through windshield vents, what is the problem?


This is a common problem on all Astro/Safari vans. The problem is a leak in the vaccum lines that control the vaccum switch responsible for changing air direction from the defrosters, dash vents, floor vents..etc.
Many of the problems that plaque the Astro/Sarfari vans and many other "Mini-Vans" is the build up of excess heat in the engine compartment. It\'s a tight place to put a V6-4.3 Vortec engine and the heat generated bounces back and cooks everything on the engine (coils, modules, sensors, wiring, and of course plastic vaccum hoses). No need to mess with your switches or anything behind the dash -- replace those thin plastic vaccum hoses to operate the vaccum switch (located just below the A/C canisters, to the right of the heater/ac blower housing) and your dash switches will magically send heated or cooled air where you want it.

Oct 25, 2010 | 2003 GMC Safari

1 Answer

The Heater selector won't change from defrost to any other settings like floor heat or straight from the dash . the switch on the dash moves but the heat only comes from the defrost vents in the dashboard


hello, sounds like the cable broke or, lots of newer veichels use air lines, any way possible, check and see if air lines are still hooked up to the back of the heater controls, should be 4or 5 air lines together, all hook on one place behind heater controlls

Feb 06, 2010 | 1993 Jeep Grand Cherokee

1 Answer

Heater/AC vent option knob produces knocking sound in back right corner. i.e. the knob rotates from vents in front to half front half floor to all floor to half floor half defrost to all defrost. the...


If I am reading correctly you are hearing the vent doors moving to redirect the airflow to the vents you choose. This is normal and can be more noticeable if the blower fan is on, putting air pressure against the doors.

Jan 09, 2010 | 2003 Chevrolet TrailBlazer

Not finding what you are looking for?
1998 Dodge Caravan Logo

592 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...