Question about 1997 Chevrolet Blazer

1 Answer

Transmissions my transmission in my 1997 chevy blazer was replaced last year and the four wheel drive has not worded since is there any way i could fix this myself it so how

Posted by on

  • ajmill22 Nov 23, 2008

    yes it a push button 4 wheel drive . but a couple of people has said it sounds like a vacuum hose that never got connected , is that possible?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 21 Answers

Ok i think you have push button 4 wheel drive , so you might want to raise the car and check the wiring to the engage engine, if im wrong and you have a floor shifter check the linkage .

Posted on Nov 23, 2008

  • gerardo flores
    gerardo flores Nov 23, 2008

    yes if it has vacuum drive axles

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What adjusments need to be made when putting a 4160le into an allwheel drive 1998 bravada transmission, from a 1998 4160le four wheel drive blazer


None, the transmissions are the same. It is the T cases that are different. All wheel drive and four wheel drive T cases are different.

May 08, 2016 | Cars & Trucks

2 Answers

How do you tighten bands on a 1997 Chevy Blazer


Not adjustable on newer model vehicles

May 23, 2014 | 1997 Chevrolet Blazer

1 Answer

Automatic transmission band adjustment in a 1997 chevy blazer


I have a 1995 Chevy 1500 4.3 v6 trans bands need to be adjusted I have two out of the four gears. Reverse tends to slip but works. How do I adjust the bands. And what side are they on. I baught it as is.

Sep 20, 2010 | 1997 Chevrolet Blazer

1 Answer

I have a 1997 Blazer in need of a new 4 wheel drive transmission. What year Blazer, Jimmy, GMC, S10, have compatiable transmissions for my vehicle?


All of the ones listed and 98 will work too. The transfer case comes off the end of the tranny and the tailshft housing comes off the two wheel drive tranny and the transfer case bolts right on, So all the two wheel drive trannys will work too. 97 and 98. Others will work too but you can't just plug them righ in as some of the sensers and switches are different. The junkyard that your dealing with if their any good will tell more that'll work than this and the changes that'll make even more trannys fit.

Aug 16, 2010 | 1997 Chevrolet Blazer

1 Answer

Flex plate or terk converter on a 1997 Chevy Blazer for sell


Fly wheel or torque converter,either way your pulling out the transmission,very costly!

Nov 25, 2009 | 1997 Chevrolet Blazer

1 Answer

Transmission slips in second gear 98 chevy blazer 4 wheel drive automatic


it sounds as if you need to replace the transmission...i don't really thing that a flush or service will help at this point...if trans is slippin already, locate a transmission from your local auto wreckers and replace it...or go new..

Nov 14, 2009 | 1998 Chevrolet Blazer

4 Answers

What transmission interchanges with a 98 4z`x4 Blazer


sorry but your stuck with the 4l60e if you want it to be right. as for using the bravada transmission thats fine you just have to use your transfer case. your transfer case uses a switch on the dash and an electric motor on the transfer case. the bravada uses a series of sensors on the front and rear axle that sense wheel slippage and send a signal to the electric motor on the transfer case causing it to lock in four wheel drive. when the sensors dont sense wheel slippage any more the system returns to two wheel drive. that,s why they call it smart track. just unbolt your transfer case from your transmission and bolt it to the bravada transmission and install it. p.s- dont forget to at least change the front pump converter seal. for 4 or 5 bucks it,s cheap insurance against a major leak and i dont think you want to pull that transmission out again and yes i saw that happen to many times. good luck.-G.J.M

Jan 04, 2009 | 1998 Chevrolet Blazer

2 Answers

1997 chevy tahoe 4 wheel drive transmission


Needs rebuilt converter is bad, a progressive problem that caused overheating most likely. www.TransmissionGarage.com

Jul 14, 2008 | 1997 Chevrolet Tahoe

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...