Question about Ford Fairmont

1 Answer

Sparkplug gap can you please tell me what my sparkplug gap should be for a 87 falcon 250 xflow alloy head

Posted by on

  • yadayada
    yadayada May 11, 2010

    Since this is not a stock set up and you did not say what engine or ignition system I have no way to know what the gap should be.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 85 Answers

This should help. rule of thumb points 30 electronic ignition 45 60 high performance ignition msd accell mallory ect 60

Posted on Nov 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont my 97 ford falcon wont fire up ?


have you checked all your leads and sparkplugs?

Jun 15, 2014 | 1997 Ford Falcon

1 Answer

Sparkplug gap for bmw 316i 1998


Stock replacement Bosch or NGK plugs are pregapped so they don't need to be gapped. Gaps are usually .035 if its a single electrode...Where you buy your pluge can tell you for sure.

May 24, 2014 | 1998 BMW 316i Automatic

1 Answer

NEED SPARKPLUG GAP FOR 1980 SHOVEL HEAD RUNNIM


Hi Anonymous, HD 5R6A spark plugs are gapped at .040" Have nice day.

Mar 03, 2013 | Cars & Trucks

2 Answers

Need to know proper spark plug gap for 1995 buick park avenue, 3800 engine


The correct sparkplug gap for a 1995 buick parkave is .060 gap. good day

Aug 27, 2011 | Buick Park Avenue Cars & Trucks

1 Answer

Need spark plug gap and tourge settings on heads


spark plug gaps is a standard 25th ,head settings for a alloy head 65lbs and cast iron 75lbs ,i dont think you can go wrong with the settings i have given you regardless of make /model/age of vehicle

Jul 19, 2011 | Chevrolet Express Cars & Trucks

1 Answer

New spark plugs make ngk bought for 1999 ford focus 1800 could you tell me sparkplug gap please in mm with thanks jim


The gap should be 1.3mm They should already be set and resetting can damage the coating.

May 04, 2011 | 2000 Ford Focus

3 Answers

How to change spark plugs


Those are as easy as they come these days. Mark each spark plug wire with a piece of tape with the cylinder # written on it, so as not to mix up the wires. Remove each spark plug wire by firmly grasping the wire by the boot (do not pull on the wire) and twist it back and forth a few times while pulling slowly. It should pop off without a great deal of effort. If it is seized and it breaks, you will have to replace the wire, or at the very least replace the terminals (if you can get some). Use an air hose and blow around the base of each spark plug to dislodge any loose dirt that could fall into the cylinders (not absolutely necessary, but a good idea). Remove each spark plug with a spark plug socket and extension and ratchet (I forget which size socket, it's either 5/8 or 13/16). Check the gaps of each new spark plug (typically around 0.035 in). re-install each new spark plug by hand (do not cross-thread them) and once you have ensured that the plug is threaded in properly, tighten the plug until it seats, and then tighten an additional 1/16 of a turn. Repeat this for the remaining plugs. Re-install wires to the corresponding spark plugs. You're done!

Jan 10, 2011 | 1983 Ford Crown Victoria

1 Answer

How do I get the spark plugs out of my 1998 ford escort to replace with new ones? Also where does the pcp Valve go?


With you hood open and you are standing in front of the car sparkplug wires need to be removed,i suggest you remove them one at a time, under each wire the sparkplug is threaded into the cylinder head,using a 5/8 sparkplug socket remove the sparkplug and replace it with new properly gapped sparkplug.Note:if you remove all sparkplug wires at once the factory wires are generally numbered 1 2 3 4 the sparkplug closesed to the passenger fender is #1 and the one clossesed to the driver's fender is #4.Standing in front of vehicle the PCV Valve is located between #3 and #4 on the backside(intake side) of the engine fitted down into a rubber hose

Jul 17, 2010 | 1998 Ford Escort

3 Answers

Correct spark plugs to get and gap? thanks


the gap is .060

just get yourself NGK plugs or Denso plugs, they are the best..

Jul 03, 2009 | 1999 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...