Question about 1990 Chevrolet Lumina

1 Answer

Hesitation acclerating from a standstill

I have 1991 chevy lumina sedan . I did a transmission swap . Iwent from a three speed auto transmission to a four speed, I also change the engine wiring harness. When I install the harness the car did not start ,so i change the wire harness again the car start up but has no get up  .I replace the timing chain because i thought it was the problem.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

What about transmission kick down?kick down also is your ignition timing have a vacuum advance or is it electronic????? sounds like a timing issue I remember the old days car always hesitated cause of timing not set!!!or out a couple degrees good luck,

Posted on Dec 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of PVC NOT PCV valve & Speed Sensor, PLEASE...for '93 Chevy Lumina 4dr sedan


Please define a PVC valve. I've been a Chevy guy for 45 years and have never heard of such a device.

Nov 13, 2015 | 1993 Chevrolet Lumina

1 Answer

94 Chevy Lumina Euro Sedan , Only stalls if I ease onto the gas as i normally would pulling out or turning. But if I go heavy onto the gas from a stop it helps avoid the stall. Any advice as to what the...


idle air control valve not working properly idle speed too low faulty transmission tcc solenoid both problems will set off check engine light.replace fuel filter and air filter,clean fuel injectors.

Nov 28, 2011 | 1994 Chevrolet Lumina

1 Answer

I NEED TO REPLACE THE BOTTOM MOTOR MOUNTS ON MY 1991 CHEVY LUMINA. THERE SO MANY DIFFERENT PRICES! THE AUTO STORE S SAY $35.00 . . .THE DEALER SAYS $125.00!!


never ever buy from a dealer unless you want to pay top dollar for the parts. i would suggest buying online like from rock auto. They normally have the best prices.

Oct 29, 2010 | 1991 Chevrolet Lumina

1 Answer

I own a 1995 chevy lumina sedan and am having transmission problem. I recently have chenged te transmission and in the beggining i worked perfectly but today when i slowed down to take a turn, and then...


Check the fluid level. If it is okay, did you change the torque convertor when you changed the transmission? Sounds like one of the two is the problem./

Sep 25, 2010 | 1995 Chevrolet Lumina

2 Answers

1999 chevy lumina doesn't shift into overdrive, why?


If it won't go into overdrive a speed sensor within the transmission may not be sending the shift signal to the transmission. Check fluid levels to make sure that's not causing the problem. Also, check that the fluid is red color and clean.

Transmission probably needs to be serviced at a reputable shop if you want this problem fixed.

Jul 04, 2010 | 1999 Chevrolet Lumina

1 Answer

Fuel Pump Bad.


remove fuel tank from vehicle and remove lock ring from tank swap fuel pump out..make sure sealing ring is installed properly

May 09, 2009 | 1992 Chevrolet Lumina

1 Answer

Will '95 chevy lumina 4t60e fit in '94 cadillac with 4t60e?


It might physically appear to look the same . but the valve body within thw transmission will contain differences

Apr 04, 2009 | 1992 Buick Park Avenue

1 Answer

Replacing driver's side mirror on a 1994 Chevy Lumina sedan


There are screws that hold the door panel on. They are typically located behind the small round plastic covers. If you look at the bottom of the door handle, you will see them. Also on the door lever, there might be a screw. After removing all of the screws, take a flat head screw driver, and gently pry up the panel. There are plastic clips that hold the panel securely to the door. Doing this will pop them out one at a time. Once the door panel is loose, lift it up, and it should come right out. Be sure to disconnect any wiring harness connectors before fully removing.

Mar 24, 2009 | 1991 Chevrolet Lumina

1 Answer

How do i remove the rear interior door panels?


best thing to do is to buy the repair manual for your car it will have step by step instructions on how to remove this as well as just about everything else you need to know about your car

Mar 22, 2009 | 1991 Chevrolet Lumina

Not finding what you are looking for?
1990 Chevrolet Lumina Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...