Question about 1994 Chevrolet S-10 Blazer

2 Answers

Wont go in 4x4 please help 1994 s10blazer

Push botton nothing happens

Posted by on

  • eagleboy0069 Nov 30, 2008

    My s10 blazer wont go out of four wheel drive?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I'm no expert but you might replace either the motor or the actuator... i'd replace the actuator first though because i have heard of this problem alot with electronic transfer cases on the blazer series... and it might not be too bad of an idea to check the fluid in the transfer case.. i too have a 1994 s10 Blazer but i have yet to have an issue with the 4-wheel drive

Posted on Nov 24, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

When you first turn the key on do the lights on the 4WD rocker switch flash? If not, does the radio work? If not, then check the 15 amp radio fuse as this provides the power to the transfer case control.

Posted on Nov 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 jimmy push button 4x4 wont engage


Could be the servo on the front diff not activating. Could be a power prob or failed unit.

Jan 15, 2013 | 1994 GMC Jimmy

1 Answer

When i push the 4x4 button nothing happens.


You may have a bad selector motor on the transfer case, this is what moves it into 4wd or 2wd, start there test for power at the motor while pushing selector buttons.

Aug 03, 2010 | 1994 Mazda Navajo

1 Answer

The boot wont open on my vw bora wen i push the botton on the boot nothing happens but it will open with the key????


2001 vw bora 1.6 key wont open boot working lock ok. lift pad nothing happens ,no power at multi plug to activate cylinder ,what could be the fault

May 10, 2010 | 2001 Volkswagen Jetta TDI

1 Answer

Transfer case not engaging push botton 1994 s10


These 3 things are common on S 10 and S15 GM 4x4 trucks and SUV's!

1.Switch in dash.
2. Actuator motor on transfer case.
3.Vacuum leaks between Engine,Transfer Case and Front axle actuator.

Mar 08, 2010 | 1994 Chevrolet S-10 Blazer

1 Answer

93 ranger 4x4 when you push button for 4x4 nothing happens, only use about once a month, hubs are man.


THEY IS A SOLINOID ON THE SIDE OF THE TRANS. YOU NEED TO CRAWL UNDERNEATH TO ACCESS IT CHECK TO SEE IF THE POWER WIRE HAS BROKE OFF

Mar 17, 2009 | 1994 Ford Ranger Supercab

1 Answer

97 JIMMY,PUSH 4X4 BUTTON,NOTHING HAPPENS


I had the same problem with my 99 Jimmy. try to disconnect your battery for about 5 minutes and see what happen. it fixed mine by doing it.

Feb 05, 2009 | 1997 GMC Jimmy

1 Answer

97 JIMMY,PUSH 4X4 BUTTON,NOTHING HAPPENS


Hi,
When you switch it from 2H to 4H you can push the switch at any speed but if you switch to 4L the car must be stop and the shifter is in neutral position.
Anyway here is my suggestion.... I would check the switch it self 1st for proper contact, also check the owners manual if there is a fuse for 4X4.
The worse scenario is the 4X4 computer is dead and if you have problem with transfer case you would notice a whining noise.

Feb 04, 2009 | 1998 GMC Jimmy

1 Answer

Low range 4x4


4x4 low function will only engage when vehicle is stopped in neutral with foot on brake. try that

Dec 10, 2008 | 1993 Ford Explorer Limited

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...