Question about 1994 Saab 900

1 Answer

Check engine light is on

Is there a reset button or what else can i look for

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 76 Answers

Two ways to reset the CEL:
Unhook the battery positive cable for an hour and reattach. This should reset the CEL, but if the car is producing a current code, it will come back on. The other way is to hook up a code reader and erase the code using this. You can use a generic code reader from Autozone or Advance Auto Parts for free to do this, or pay the dealer an outrageous sum to use the Tech 2 to do it. Again, if the car is still throwing a code (the code is not an old stored code) the CEL will return.

Posted on Dec 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my check engine light on a 2003 passat


if its the same as reset service light then hold in the right hand clock button on the facia and whilst holding it in switch on the ignition....release the right hand button and then turn the left hand button to the right...this resets the service indicator light and may help with your problem
Cheers
Colin

Jan 16, 2012 | 2003 Volkswagen Passat

Tip

RESET THE CHECK ENGINE LIGHT ON THE 99 HONDA ACCORD


THIS IS HOW YOU RESET THE CHECK ENGINE LIGHT ON THE 99 HONDA ACCORD. 1. With the Car Off, Press and hold down the Odometer Trip Reset Button. 2. While still pressing the Trip Reset Button, Turn the Ignition Key half way on where all your oil, check engine lights etc.. turn on. Don't turn it as far as you would to normally start the car. Wait a few seconds and the Check engine light will turn off. 3. Turn the key back to the Off position and you're done. What a scam Honda has with the BS Check Engine Light.

on Dec 07, 2009 | Honda Accord Cars & Trucks

1 Answer

How do you reset the "check engine light" and the


The maintenance lights rest by holding down the speedometer reset button and then turning on the key. Hold button for 15 second after ignition is on. Light will go out.
The check engine light may be another matter. If it does on also go out with the above procedure, you may have computer fault codes that need to be addressed.

Feb 09, 2011 | 2000 Honda Accord

2 Answers

LEXUS LS 2004 Maint Reqd (Master warning light) how I can switch off after change the oil engine?


You can disconnect your battery for 15 minutes or pull the fuse for an ECM or PCM fuse, but the best way is to visit any local repair shop. Most shops will have a universal Check Engine Light Code Reader that can quickly and safely reset check engine light trouble codes. It should take about 30 seconds.

Ask your local service center if they could reset the check engine light with a Check Engine Light Code Reader.

Dec 14, 2009 | 2004 Lexus LS 430

3 Answers

Check engine light is on and ECU blings 12 times.


Can't take an OBD-0/pre-OBD car to auto zone as only OBD-2 cars have a hook up for the scanner.

Jun 27, 2009 | Honda Civic Cars & Trucks

1 Answer

Service engine light will not go off.


the reset button is in your fuse box panel, little red button says reset , start car and push the button until you service engine light goes out , fuse panel should be on driver side dash , have to open the door to find

Mar 28, 2009 | 2001 Oldsmobile Alero

3 Answers

Resetting the check engine light


On my 2006 you set the odometer to the normal odometer mode using the button on the dash. When you get that setting, hold the button down until the display flashes. Once it begins to flash, let go of the button and then push it again. The light should then go out.

Mar 12, 2009 | 1996 Toyota Camry

1 Answer

Check engine light comes on


the only way to reset the warning light is to plug in a code reader and reset it, most mechanics will do this very cheap, hope this helps

Oct 04, 2008 | 1997 Hyundai Sonata

2 Answers

How do I reset the engine check light after an oil change on a 2004 corolla?


Is there a reset button where I can turn off the Check engine light on a 98 Corolla? There has to be somewhere. After certain miles it will come on and I know from another car I had that it won't cut off until it reaches a certain amout of mile but someone told me where the reset buton was and I didn't have to deal with that annoying light anymore.

Aug 11, 2008 | 1998 Toyota Corolla

Not finding what you are looking for?
1994 Saab 900 Logo

Related Topics:

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

rgbypoet

Level 2 Expert

162 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...