- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may have a short in your wiring and it may cause more damage by touching any metal surface depending were the routing of the wires run through because the whole car is negative therefore I suggest you take it to an expert electronics technician right away for and electronic diagnostic check up!
The 2006 Chevrolet Trailblazer has the most common hook-end wiper arms. Purchase the replacement blades first
and there will be additional instructions/illustrations on the replacement
packages. Locate and press the tab or button where the wiper blade is
inserted into the hook of the wiper arm and pull wiper blade out of hook.
You may have to rotate and flex the blade to make enough clearance for the hook
to pass through.
When you open the hood you will be looking straight down at the light lenses. On both sides of the lense body on the top you will see two small steel clips. Lift the clips up and this releases the lense body. You will now be able to pull the body out straight toward you. You may need to wiggle it around a bit as it has a habit of jamming up on the wheel well side of the vehicle. Once its out grab the light harness and turn it counter clockwise and pull it out. Repalce the bulb and reverse all the instructions to replace the body.