Question about 1996 Ford Explorer

1 Answer

Replaced relays and ckecked fuses horn not working 1996explorer

Repair horn 1996 ford explorer

Posted by on

  • 1 more comment 
  • Anonymous Feb 15, 2009

    cruise and horn does not work. all relays and fused seem ok

  • Anonymous Feb 22, 2009

    MY HORN NOT WORKING REPLACED RELAY AND FUSES 1999 F-150

  • Anonymous Mar 16, 2014

    horn does not work on my 2008 ford explorer.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 39 Answers

With the horn you can run a wire from the battery to the horn to check it if that dosent work then it is probably the contact wire inside the steering column, I cant remember the name of the part but this should fix the horn and cruise problem.

Posted on Feb 25, 2009

  • mlusk Feb 25, 2009

    the name of the part is the clock spring.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford explorer with horn not working at all not even keyless entry and fuse is fine


The horn itself is often the culprit. They can be temperamental. Easy way to check is to run 12V directly to the horn and see if it works. If it does, and the fuse is good, look to the horn relay.

Jan 13, 2015 | 2006 Ford Explorer

2 Answers

1998ford explorer horn doesnt work


If the fuse is OK, check if you have power at the horn, if yes, replace the horn, if not check the switch or wire. make sure you have a good ground too.

Mar 21, 2013 | 1998 Ford Explorer

1 Answer

Horn problem on 2001 ford explorer xlt


Hi there,

Inspect the following components, in this order (with key off) until you get it working:

** Disconnect the plugs from the Horn terminals. Run separate jumper wires from the Batt (NEG & POS), to the horn. If horn does not work, then replace horn. If horn works fine, then continue....

** Check fuse # 10 (15A), in the Battery Junction Box - replace if defective. Check horn operation.

** Check Horn Relay (also in the Battery Junction Box) - remove the relay, give it a gentle tap, and plug back in. Check horn operation.

If all the above prove ok, then the fault lies in your steering wheel/horn switch assembly.


Cheers,

Jul 14, 2011 | 2001 Ford Explorer

2 Answers

My horn on my 96 Ford Explorer randomly starts a continuous honk and I cant shut it off


check the horn relay first, in the engine comaprtment fuse/relay box. see owner manual for chart.

May 24, 2011 | 1996 Ford Explorer

1 Answer

The horn does not work on my 2000 Ford Explorer. does it have a horn fuse, if so, where is it? does it have a relay, where is it?


it does have a fuse/relay. It should be located in the fuse box under the dash. If not that one, the fuse box in the engine compartment

Mar 11, 2011 | 2000 Ford Explorer

2 Answers

My horn is not working . Where is the horn located


the explorer has two horns, they are both mounted under the driver's side headlight behind the front bumper. you will need to remove the splash shield to get to them. Hope this helps you

Jan 15, 2011 | 1996 Ford Explorer

1 Answer

I have a 96 explorer xlt v6 has alarm that works thru the horns. the horns quit working checked fuses in dash no burnt ones looked for horns or horn under hood could not locate where they were. doug


The horns are located on the left side of the radiator
support. To check them, use a jumper wire from the
+post on the battery unplug the horn and touch the
wire to the horn contact. If it toots check the horn relay in the power dist. box on the left fender. Also
check fuse #4 a 20amp fuse in the same dist box.
But if the horn won't toot replace the horn. If none of
the things I've mentioned pan out. You can get back
to us and we'll dig a little deeper. Good luck.

Apr 10, 2010 | 1996 Ford Explorer

1 Answer

Horn works, fuse is good, yet can't activate horn from steering wheel.


If you press the horn button, can you hear the horn relay?
If not, it could be the horn button, or the relay,
If you hear it click on and off it is then likely the relay.
Test the horn button with a meter. if it is working, replace the horn relay.

Hope this is of some help.
Ed

Apr 26, 2009 | 1991 Ford Explorer

2 Answers

My horn on a 1998 ford zx2 has stopped working. The fuse is fine.


The horn(s) burn out very easily, also there is a relay, press the horn button repeatedly and listen for a click noise (it may be under hood), if you don't hear it the relay may be at fault, if you do the horn is burned out, not uncommon.

Aug 04, 2008 | 2000 Ford Explorer

Not finding what you are looking for?
1996 Ford Explorer Logo

Related Topics:

662 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...