- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
open bleeder nut have someone step on brake peddle, depress, then air and fluid comes out, keep pedel down, tighten nut. do it until only fluid comes out. 3 times should be enough. Make sure to put clean brake fluid back into brake master. Keep full if you suck in air you have to start all over.
Can you provide a bit of history on what occurred prior to the light coming on? Did you get your brakes replaced recently? Have you had any other work done on the vehicle, especially any electrical work? Have you had any other dash lights/gauge problems, particularly intermittent operation? Is there any specific event you think might have caused this to occur? Any further info would be of significant help in determining the problem. Thanks.
You have some wiring problems shorting out that is coming from the dash board so if you or anyone you know how to use a multimeter to check the wireing harnesses plus check any connectors that might be just very touching the connector of dashboard which means a bad connection to dashboard.