Question about 2000 Ford Focus

2 Answers

Ford focus 2002

The heater blower does not work

Posted by on

  • Anonymous Dec 27, 2008

    heat/ac blower not working

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 85 Answers

The blower resistor is the problem

Posted on Nov 23, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The blower motor may not be working for a couple of reasons.....first, easiest, check the fuse. in the panel under the driver's side. If the blower used to work fine but then suddenly quit all together...check the fuse. If the motor only worked on say the highest speed when the other speeds no longer work then check the resistor which is located in the air box. It is put there by the engineers cause that resistor gets hot and the heat ultimately is the undoing of the resistor. so if only some of the speeds on the blower work...check the resistor....well replace the critter. You can do it yourself if you are built like a spaghetti noodle and have small girly hands. the parts isn't very expensive.

Posted on Mar 19, 2009

3 Suggested Answers

dnewcombe1
  • 1564 Answers

SOURCE: heater blower not working on seting 1 2 or 3 but

You'll need to check the voltage coming out of the switch. If it proves to be okay than you'll have to replace the resistor block in the heater box, this is a small rectangular black plastic plate with four wires connecting to it. It should be located under the hood on the passenger side firewall. Remove the two 5/16ths retaing screws and remove the block. To replace reverse the order given here. Thank you, Dana

Posted on Nov 15, 2009

Testimonial: "thank you very helpful info "

  • 1 Answer

SOURCE: heater blower does not work on my ford focus

the heater blower on my ford focus only works on 1,2,3 it works on 4 can anyone help

Posted on Feb 13, 2010

geterrollin
  • 277 Answers

SOURCE: how do u replace a heater blower motor in a ford

Under the dash on the pssenger side you will find a round blower motor approx 6" round.Remove the electrical harness from it by pushing in the clip and then remove the 5-6 screws holding it in.Installation is the reverse order.Hope this helps

Posted on Jan 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hello my name is Sean and I have a 2002 ford focus wagon with a 2.0 motor. The blower fan for the heat and air has stoped working. I have ordered a new blower fan and resistor but havent received yet. I...


the fan motor is maybe bad, disconnect it (the motor) and put in new fuse, if its ok, then the motor is bad. the resistor only handles speeds lower than HIGH. so replace the motor first, then try it, if all speeds work, then the resistor is OK.

Sep 12, 2011 | 2002 Ford SVT Focus

1 Answer

Heater and air stopped working on my 2000 Ford Focus zx3


CHECK BLOWER MOTOR FUSE AND RELAY.SEE IF POWER GOING TO BLOWER MOTOR YOU HAVE FAULTY BLOWER MOTOR.IF BLOWER MOTOR FUSE AND RELAY OKAY.IF NO POWER GOING TO BLOWER MOTOR BUT POWER AT AC AND HEATER CONTROL SWITCH. BLOWER MOTOR HAS POOR GROUND OR AC AND HEATER CONTROL SWITCH IS BAD.

Jun 12, 2011 | 2000 Ford Focus

1 Answer

Heater switch on my ford foucs only blows on setting 4, 123 wont work why is this.


Dear Madam or Sir,

the problem with your Focus is the blower motor´s pre-resistor. This is a low-priced spare part (app. $15) and can be serviced in no time.

The pre-resistor is mounted to the blower motor´s assembly, change should be done in less than 45 mins of time at the shop.

Jun 25, 2010 | 2002 Ford SVT Focus

2 Answers

Ford 2002 focus blower motor only works on switch


You may have 2 separate problems, check the bower motor resistor first, if it's bad replace it and THEN you should have the fan blowing on the lower settings.

If the ac turns on after you fix this then problem solved, if not it may be unrelated have a pro look at the ac.

Apr 03, 2010 | 2000 Ford Focus

2 Answers

Focus 2002, A/C fan does not work on settings 1-3


common problem, replace the blower motor (fan) resistor, this is what controls the fan speed,its located on heaterbox next to blower motor.heres a picture of it,its on the rightside of dash toward the bottom. hope this helps.852ab4f.jpg

Feb 19, 2010 | 2000 Ford Focus

1 Answer

A/C and Heater only works on 4


price and replace blower motor resistor

Jan 19, 2010 | 2000 Ford Focus

1 Answer

How to fix heater on ford focus tried a new motor


check the wiring to the reostat (the resistor that controls the fan speed) also check the reostat has not burnt out. (the reostat should be near the heater motor housing)

please let me know if this helps
cheers
big mike :)

Dec 18, 2009 | 2000 Ford Focus

3 Answers

Heater blower does not work on my ford focus


the heater blower on my ford focus only works on 1,2,3 it works on 4 can anyone help

Nov 26, 2009 | 2000 Ford Focus

1 Answer

Heater in 2005 Focus


Is the interior blower working? I also had this problem, if your blower isnt working check resistors for blower speed then the blower itself

Jan 21, 2009 | 2005 Ford Focus

1 Answer

Heater blow wont work on any settings


CHECK FOR GROUND AND VOLTAGE AT BLOWER MOTOR WHICH SHOULD BE TO LEADS GOING IN;IF BOTH EXIST ,CHANGE BLOWER.IF NOT CHECK FUSES,RELAYS OR SWITCHES.

Jul 26, 2008 | 2002 Ford SVT Focus

Not finding what you are looking for?
2000 Ford Focus Logo

586 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...