Question about 1991 Jeep Wrangler

1 Answer

How do I replace the interior LH door handle 97 Jeep Wrangler?

The interior door handle broke off on my 97 Jeep Wrangler, looking for instructions on how to replace please. Thanks

Posted by on

  • moome795 May 20, 2009

    repair door handle for 1991 jeep broken rod????????

  • Anonymous Mar 20, 2014

    STARTER WON'T TURN, BATTERY CHARGED, GAUGES FLICKER BUT CAN BE STOPPED BY PRESSING INTERIOR LIGHT BUTTON IN DOOR

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 74 Answers

You will need a t-20 or t-15 torx bit driver to remove 2 screws holding the handle this is all that holds them on, on once you have a replacement handle it is easier to remove 2 lower screws on the door panel and unsnap the door panel to loosen it this will allow space making it easier to reinstall new handle just slide each end into the slot and reinsert 2 screws to not fully tighten until door panel is snapped back in. the panel is held on with clips and can be released using plastic pry tool around door panel edges.

Posted on Nov 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Jeep Wrangler inside door handle broke


i have just bought a peugeot 306 and it is making a catching noise a man in the garage said it is one of the pulley,s what can i do to fix this

Jun 28, 2012 | 2007 Jeep Wrangler Unlimited Rubicon 2...

1 Answer

The interior lights on 1993 Jeep Wrangler have no


Find the pin switch on the front of the drivers side door jam, check the back side of the switch, (near the E brake pedal) make sure the plug is attached. It just plugs in. It is easy to plug and unplug the wiring to this switch on the YJ's so you can drive with the doors off and not worry about your interior lights being on and draining the battery when the engine is off.

May 15, 2010 | 1993 Jeep Wrangler

3 Answers

I have a 2002 jeep tj wrangler and when I drive without the doors on my interior lights stay on, but when the doors are on it's fine.


i had same problem went to 4wd.com the sell a set of spring clips that hold the button in with doors off. $9.95 a set.

Aug 04, 2009 | 2002 Jeep Wrangler

1 Answer

1998 Jeep wrangler


Remove the inner door panel and check to make sure that the linkage rod that goes between the outer handle and the latch is connected. It's possible that the plastic end clip broke.

Jul 10, 2009 | 2006 Jeep Wrangler

1 Answer

2000 dodge intrepid driver door latch broken. When we take the door apart, there is a plastic piece that broke that attaches the handle to the rod that pulls the latch. It does not look like there is an...


We purchased a door latch to replace ours from Dodge. It came with instructions as follows:

Instruction Sheet

Front Door Handle/Bezel Replacement for LH

1. Remove the front door trim panel using the procedures outlined in Section 23 of the appropriate service manual.

2. Place door trim panel on a clean work surface. Drill the mounting bosses' heat stakes, which attach the existing door handle/bezel to the panel, with a 21/64-drill bit. Take extra care to only drill in the center of each heat stake.

3. Remove existing handle/bezel from trim panel.

4. Clean the back of the trim panel of plastic fillings.

5. Seat the new handle/bezel into location.

6. Place the push nuts onto the handle/bezel bosses.

7. Use a 10 mm socket to install the push nuts all the way down on the mounting bosses to secure the handle/bezel onto the door trim panel. Using a wiggling side-to-side motion may be helpful.

8. Install the lock switch from the original handle/bezel to the new door handle/bezel.

9. Reinstall the door trim panel using the procedures outlined in Section 23 of the appropriate service manual.

Hope this helps.

Jul 02, 2009 | 2000 Dodge Intrepid

2 Answers

Removing doors from Jeep Wrangler - Dome Light Stays On


look on the reverse side of your fuse panel door

Jun 28, 2009 | 2000 Jeep Wrangler

1 Answer

1997 Jeep Wrangler left interior door does not work. The lock rod is visible, but I have not been able to locate the position or see the latch rod. Could it fall complete off? If so, how do I get to it to...


Not only do you have a lock rod but you have a lacth control rod. That's the one that's not working. Remove the door panel and replace the plastic clip that broke with a new one.

Apr 23, 2009 | 1997 Jeep Wrangler

1 Answer

Need to replace interior driver side door panel on 2003 jeep wrangler, full size doors. how do i get it off?


to remove the door pannel there is 2 screws and then like everything ells on jeep there are little clips that you need to pull off, try removing the screws and then pulling from the interior pannel

Mar 21, 2009 | 2003 Jeep Wrangler

1 Answer

Inside door handle rod on a Jeep Wrangler 1999


You will need to remove the door panel. Most use a special clip to attach it to the lock mechanisim. Look in the bottom of the door to find the clip that fell off. If you can't find it you will have to go to chrysler to get another clip or try a wrecking yard and they will probably just give it to you.

Dec 10, 2008 | 1999 Jeep Wrangler

Not finding what you are looking for?
1991 Jeep Wrangler Logo

904 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...