I would like to know how to set the timing for a C220 1994 model?
If my memory serves me correct-there is a mark on the crankshaft pulley which lines up with the zero mark,take off valve cover and there is two 6mm holes that line up in the cam pulleys,the chain tensioner is down the drivers side of the engine take it out and push it all the way through and put it back in again ,they arent to difficult to do depending on your ability......
580 views
Usually answered in minutes!
Thanks I have used the TDC mark but which zero do I use cause there is a zero mark before TDC and the other zero mark is after the TDC mark. Do I have to lock the 6mm holes that line up in the cam pulley?
×