Question about 2001 Hyundai Sonata

1 Answer

How do you change a front wheel baring on 2001 hyundai sonata

4 door
6 cylinder

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 132 Answers

Pretty simple really remove wheel you can usually remove rotor with brake caliper still together as to not upset brake shoes in the center of the wheel hub there is a cap that you remove with screw driver and there will be a nut which will have a split pin or a lock washer installed to to stop nut from coming loose remove split pin or flatten out tabs on lock washer and remove main nut the remove rotor to reveal wheel bearings replace re grease and reassemble dont do up main nut over tight make sure wheel is free spinning without excess movement be sure to fold lockwasher tabs or place split pin remember if you have a problem you always have the other side to go on dont pull both sides apart at the same time hope this is helpfull any more questions just ask glenn.......

Posted on Nov 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Firing Order for a 2002 Hyundai Sonata


Since the 4 cyl engine uses direct ignition, here is the info for the V6.
Standing in front of the car, the cylinders in front are 2-4-6 and the cylinders next to the firewall are 1-3-5.
The wires on the coil are 1-4-5-2-3-6. The actual firing order is 123456.

Aug 23, 2012 | 2000 Hyundai Sonata

1 Answer

Is the 2001 hyundai sonata a 4 cylinder car or a 6 cylinder


Hi the 2.0ltr is a 4 cylinder and the 2.6ltr is a six

Oct 08, 2010 | 2001 Hyundai Sonata

1 Answer

Spark plug cylinder


For the 2005 Hyundai Sonata
I do not know if you have the 2.4L In-Line 4-Cylinder or 2.7L V6; however I have included both below....

For the 2.4L In-Line 4-Cylinder:
Firing Order:
1-3-4-2
Cylinders:
..........(back).........
|...1....2....3....4...|
.........(front)

For the 2.7L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
.......(back)........
|...1....3....5...|
.......................
|...2....4....6...|
.......(front)
Coil Connections:
(back)
...3
...6
...2
...5
...4
...1
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Jul 02, 2010 | 2005 Hyundai Sonata

1 Answer

How do I change the front wheel bearing in a 2001 Sonata 6 cyl


jack the front off the ground remove the tire remove the brake caliper remove the rotor remove the bolt hol;ding the front axle into the spindle hub, remove the hub and bearing.

May 06, 2010 | 2001 Hyundai Sonata

1 Answer

Firing order for 1994 Hyundai Sonata 3.0 L V6


For the 3.0L:

Firing Order:
1-2-3-4-5-6

Cylinders:
....(back)
6.....4.....2
5.....3.....1
.....(front)

Distibutor Connections:
....(back)
4.....5.....6
o.....o.....o
||||||||||||||||||||
o.....o.....o
3.....2.....1
....(front)

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!


Mar 17, 2010 | 1994 Hyundai Sonata

1 Answer

Which cylinder in #6 on a 2006 V6 hyundai sonata


Autozone.com says that for this vehicle the firing order is 1-2-3-4-5-6 and the set-up is 2/1 4/3 6/5 meaning that the #6 cylinder is far right on the back. It goes #1 #3 and #5 in the front and #2 #4 and #6 in the back.

Jul 18, 2009 | 2007 Hyundai Sonata Limited Sedan

1 Answer

Change sparks plugs on 06 hyundai sonata v6


You didn't specify whether you have the (4) cylinder or the (6) cylinder engine..... I have a 2004 Hyundai Sonata 2.4L 4 cylinder and I just changed the spark plugs in it. I believe that the 2005 2.4L engine is the same. To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way. Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed. Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right. Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place. To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place. Repeat same procedures for spark plugs number (3) and (4). Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold

Jul 08, 2009 | 2006 Hyundai Sonata

2 Answers

2001 sonata V6 spark plug


For starters if your going to do 1 do all. The locations are from left to right when standing in front of the car. 1, 3, 5
2, 4, 6

wires are 3
6
2
4
5
1

Nov 03, 2008 | 2001 Hyundai Sonata

Not finding what you are looking for?
2001 Hyundai Sonata Logo

341 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...