Question about 1999 GMC Suburban

2 Answers

Power stering 1999 GMC SUBURBAN

I REPLACE THE POWER STERING PUNP I HAVE THIS PROBLEM SOMETIMES IT GETS REAL HARD TO MAKE A TURN MOSTLE WHEN I TRAI TO PARK THE TRUCK

Posted by on

  • Anonymous Mar 27, 2014

    after fitting new pump and preasure switch

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

Are you sure that the belt is tight?

Posted on Nov 22, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 86 Answers

1. Air could still be on your power steering system after you replaced your pump.
2. There could be another reason why your having a hard time turning your steering wheel, have your steering linkages, camber, alignment checked, so as to prevent breaking yor new pump again
thank you for choosing fixya!

Posted on Nov 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power stering pump 2008 f150


You will need basic hand tools. First take off the serpentine belt. Unhook the high and low pressure lines, they should be toward the rear of the pump. Remove the four bolts securing it to the engine. Replace the pump and make sure to refill fluid.--------------------------------------------------------------------------------
Digiprog3 Odometer Correction Tool

Mar 28, 2013 | Cars & Trucks

1 Answer

2003 honda accord 2.4 power stering hard,replace pump got little softer but still hard


The steering is controlled by the steering rack,
& they get stiff because no one changes the fluid
every 3 years

The upper strut bearings fail & make steering stiff

Doubt the pump was a problem at all

Mar 03, 2013 | Cars & Trucks

1 Answer

Mercury Sable 99 power stering problem


ALL FORDS WILL DO THAT THERE IS NO BY PASS IN GEAR BOX OR RACK , WITH ENGINE OFF THEY WILL OVER FLOW. ONLY FORD SORRY TO SAY YOU FIX IT BUT IS ALL THE SAME ..

Feb 16, 2013 | Mercury Sable Cars & Trucks

1 Answer

Power stering is getting hard to turn


Have you checked the fluid level for the power steering pump in awhile? Is the belt in good condition and not slipping ?

Aug 13, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Car stering wheel is hard to turn left or right


your power steering pump has a cap on it.you have cold mark and hot mark.when car is cold engine not running.when you remove power steering cap it should be on cold mark.if not add until you get to cold mark on cap stick..dont over fill or you blow the seal.now when engine is hot been running.turn off car check.power steering cap should read full hot.mean level is correct.when you first check power steering fluid and it was real real low.you got a leaking high pressure hose.or power steering pump seal is leaking.if all check out good.your problem could be low tire pressure.worn ball joints.and tie rod ends.rack and pinion steering gear binding.

Jul 29, 2009 | 2001 Hyundai Elantra

1 Answer

My car power stering light comes on and then the wheel is hard to


this system can be tested for codes, I would suggest you have the dealer do this test, all the parts are very expensive so guessing is not a good idea. most probale cause is a wheel motion sensor on the steering column.

Jun 17, 2009 | 2005 Chevrolet Malibu

1 Answer

It is really hard to make turns. check power stering fluid ok


check power steering fluid if real real low you have a leak at hoses or pump seals.if all is good check for low tires and lack of lubrication to at ball joints and tie rod ends. if all is good you have power steering pump failure.

Apr 22, 2009 | 1998 Plymouth Voyager

1 Answer

Power steering


if you have to keep adding fluid it hasto be leaking it somewhere.
Have someone work the steering whell back and forth going all the way and make it work a little each way meaning turn it right all the way till it won't turn an hold it so it winse and the same way the other way.The leak should show up

Jan 10, 2009 | 1999 Oldsmobile Intrigue

1 Answer

Disconnect stering shaft for the #3 plug. I have no power at all


try removing ground on battery for 5min to reset control module

Dec 13, 2008 | 1998 GMC Jimmy

Not finding what you are looking for?
1999 GMC Suburban Logo

Related Topics:

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...