Question about 2002 Audi A6

1 Answer

I brought a car audi 2000 a6 and the radio show the word SAFE, how I cant to fix

Posted by on

  • lopgnyc Nov 24, 2008

    thanks, I'll try to go the dealer to scanner it, because I brought in a Auction, and I dont have a Manual.



  • lopgnyc Nov 24, 2008

    HOW CAN TO ENTER DE CODE?

    THANKS

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 260 Answers

The radio is in security mode and requires a 4 digit code to release the radio back into operation. the code is usually inside the owners manual on a preforated type card. maybe first couple pages. (if the manual is still even in there) or maybe previous owner has written it down in manual somewhere. if not then the dealer may have to extract it through their scanner. may cost $$. the 4 digit code will start with 1 or 0 if you happen to find code, reply back to me and ill help you enter it, may be in manual as well. hope this helps

Posted on Nov 22, 2008

1 Suggested Answer

  • 4 Answers

SOURCE: I BROUGHT A AUDI 2000 A6 4.2 SAFE RADIO

Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Posted on Nov 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I disconnected my battery from my Audi 2000 A6 and I had a cd in and now its showing CD IN SAFE what do I do?


You have to put the radio code in to get to work you will find it in the owners book.

May 20, 2011 | 2000 Audi A6

1 Answer

Radio cd symphony blocked in safe.the car is audi a6,i don't have the cod.


IMPORTANT NOTE:
You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 2000 Audi A6 radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!

Apr 09, 2011 | 2000 Audi A6

2 Answers

My 98 a6 audi has the radio locked what is the code and how can I unlock it.


IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

The sequence of programming for 2000 Audi A4 radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Jan 18, 2011 | 1999 Audi A6

1 Answer

My audi a6 car stero


IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Please rate my response. Thanks !

Apr 08, 2010 | 1999 Audi A6

1 Answer

How do i reset a sterio code for a 2000 audi a6


urn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Dec 15, 2009 | 1996 Audi A6

1 Answer

Audi a6 stereo on safe how do i fix it


Enter the radio code, take your car to the dealership with proof of ownership and they can get it for you, you should have it from the previous owner or if you bought it new, to enter it, hold the pscan and rbds buttons for a few seconds, then numbers will show up, press the corresponding buttons to change the numbers, when you have your code in, hold pscan and rbds buttons for a few seconds. when you release the radio should unlock, good luck

Dec 08, 2008 | 2001 Audi A6

1 Answer

I BROUGHT A AUDI 2000 A6 4.2 SAFE RADIO


Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Nov 22, 2008 | 2000 Audi A6

5 Answers

Safe mode in Audi Symphony radio


hold rbds and pscan till you see numbers then use the radio memory buttons to control the number you want to put in after the numbers are put in hold rbds pscan again till u see it says safe and radio works.

Sep 18, 2008 | 2000 Audi A6

15 Answers

AUDI A6 RADIO CODE


I just posted a solution for this problem. It comes straight from the radio manual. The dealer should have told you this. If you want him to do it he'll charge money for his time. IF YOU LOST YOUR CODE. THE DEALER CAN HELP YOU OR IF YOU HAVE YOUR 4 DIGIT CODE: dd43c71.jpg
2b61443.jpg

Jul 22, 2008 | 2002 Audi A6

Not finding what you are looking for?
2002 Audi A6 Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...