Question about 1997 GMC Jimmy

1 Answer

97 jimmy power seat wont work, blinkers wont work

My blinkers wont work but flashers do, and my pwoer seat doesnt work. the fuse blows everytime i go to put in a new fuse.my heater is also not working and would like to know where i should start with that

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have ur aswere for the blinkers. u have to change the breakers under the stereo where the outputs are. there are to gra things

Posted on Dec 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My turn signal fuse blowed got new one now they dont work why


canada or USA, (diffr. laws, different wiring, even DRL up there)
station wagon or NOT?
THE TURNS FUSE BLEW OUT. 2nd time, 3rd,,,?????
that means the circuit is overloaded or shorted.! (prevents fire)
but did it blow a 2nd time, why not say so???

all 4 lamps dead. or stuck on, or flash odd. or what? dim?
does the cluster lamp flash, , in blink or emerg. mode?
wont work , means what, (dead or stuck on or dim)?????
do emergency flashers work? ,dead, stuck on what?
does car drive perfect day or night?
are any other things on car dead, of odd acting?
we see all this , 1st 5 min in a shop, zero here.
ive answered Forenza blinks here, many times.
ever search?

ill now answer by guessing USA non stationwagon and no DRL.
dash box fuse 4 kills blinkers

EF1 (engine fuse) 1 good?
dash fuse 14 and EF1 can kills emerg. flasher

so of Emergancy flash lamps blows fuse 14,(smaller of 2)
then the blinkers are in fact shorted.
does it?
if yes, then find out which side blows the fuse 3.
turns left blow or turns right blows.
so if say turns right blows, F4 fuse.
if true ?remove all bulbs front rear right bulbs.
does the fuse hold now,(means not blown)
then buy new lamps there. problem solved
bulbs can in fact short.
not just blow open.
Tell the full story and all this gets easy.
For sure emergency flash,

26123255-vhg5j1pxaeih5p05yacvrs2p-1-0.jpg

Mar 09, 2016 | 2007 Suzuki Forenza Sedan

1 Answer

Blinkers not working 97 gmc jimmy


You may need a voltmeter to check if power is going into the turn signal switch. Start at the turn signal fuse and see if power there, with key on.

Jan 12, 2014 | 1997 GMC Jimmy

2 Answers

On a chevy traverse i cant get the windows to work. i cant get key out of ignition, and right rear blinker doesnt work


on my 2009 chevy traverse the flashers, windows, power seats , backup camera, side mirrors, and brake lights stopped working and I couldn't get the the key out. my solution to the problem was a blown fuse under the hood. It was the fuse I believe mark power batt 1 a big red 50 amp fuse

Dec 02, 2012 | Cars & Trucks

1 Answer

Turn signals blin continually


There is only a few things that can cause blinkers to blink continually, meaning if your saying they wont shut off, Normally it is the blinker flasher or a fuse. Sometimes it can be in the blinker switch itself. I first would check the flasher, and turn signl fuse. If the blinker stays on and does not flash, still can be bad flasher or fuse or a ground problem, You would then have to check the wires around area where there contact to the tail light blinkers and front blinkers. But first start as said earlier with checking flasher fuse, switch and fuse. Mike

Jan 16, 2012 | 1995 Cadillac DeVille

1 Answer

My power seats wont work on my 2000 jimmy cant find fuses or circuit breakers for the seats can you help thanks john


there is a 25 amp circuit breaker for seats.should be marked POWER SEATS in the fuse block. the ORANGE wire at the switch gets power from that breaker, so check the ORANGE wire for power.

Sep 23, 2011 | 2000 GMC Jimmy

1 Answer

I'm not getting power to my turn signals, and I dont know where the flasher cans are located.I'm getting power to my hazards but nothing to my blinkers


Flashers should be on or near the steering column in a metal clip. One for trun signals, one for flashers. Did you chekc the fuses? The flashers and turn signals are on separate circuits.

Dec 20, 2010 | 1997 GMC Jimmy

3 Answers

The blinkers and flashers are not working on my 2001 Grand Cherokee. Can you tell me where to locate the relay or switch to replace? Its not the fuse, we checked that first. thank you


when you get in your car and use the car turn signals and it does not work from the inside or out side and your hazard light dont work to then you need to replace the fuse located inside the front hood in a black box or inside the car located under the stering wheel next to the gas and brake pedle on the side. Remove it and check the fuses and flasher relay. The flasher relay in a black square looking fuse that has 3,4, or 5 prongs. That is your problem of why the hazord lights and blinkers are not working, you can go to a part store to find the flasher relay for 9 to 15 dollars max. Napa has more of a selection. PS.... when you find the flasher and its burn out it is no good ; make sure the volts match!!!! If you buy a flasher and it burns out instinly after replaced then wireing is short and go with less volts you hace to ballance things of your car was worked on before, things where changed. Check you lights in front and back brights and dim, brakes and reverse lights. replace bulbs if needed could correct the problem if flasher still doesnt let blinkers or hazord work. If bulbs where replaced and still no blinkers or hazord lights then you need a new or used (another) switch nob. You can go to a local junk yard and take off what you need off the same car you have and pay for it then replace it on your car. Or you can go to amazon ebay or such to find. If you are a WOMEN or OLDLADY or some one not good at removing parts then this is not your job. Find someone who can help, or pay something that could be so easyily done. I hope this solves your question.

Mar 31, 2010 | 2001 Jeep Cherokee

1 Answer

Blowing brake light fuses everytime you hit brakes.


Sounds like a short in the steering colume, maybe the turn signal switch, or a wire that the insulation got wore thru in the colume. Unhook break light switch and try the turn signals and hazards again and see what happens, maybe you can isolate it that way. Also if you havent done it already chk.the sockets in tailight housing for corrosion and bear wires, or anything, even ground wires.

Apr 10, 2009 | 1998 GMC Jimmy

1 Answer

Blinkers not working on 97 jimmy


located uner dash near centre must pull down all plastic inder dash there should be more then one flasher module there should be right in front of centre concole.

Jan 02, 2009 | 1997 GMC Jimmy

Not finding what you are looking for?
1997 GMC Jimmy Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...