There are 4-8 mm bolts holding the pulley on. Usually, you can hold the pulley by hand while breaking them loose. If they are too tight or you can't hold it tight enough, leave the serpentine belt on to help hold the pulley while you begin to loosen the bolts.
SOURCE: Starter location
bottom rear of engine block, round with wires going to it, u have to jack the car up to really see it..
SOURCE: Where is the fuel pump on a 1999 oldsmobile 88?
It is in the fuel tank.The fuel tank has to be removed to access it.
SOURCE: 1996 Oldsmobile 88, where is the flasher unit so I can replace
I believe it is under the glove box door between it and the ashtray. You'll have to remove the panel under the dash (no big deal) and it is in a metal clip attached to the dash panel. Good Luck
SOURCE: how do replace the power steering pump on 1996
remove the pressure and return line, the belt, remove the mounting bolts. Use a "power steering pulley puller" to remove the puller. This tool also works as an installer.
SOURCE: Serpentine belt is riding on edge of 1989 Olds
you will need to take the raidator out then take the fan off then remove all bolts to the pump then pull out reverse order to put new one on
72 views
Usually answered in minutes!
×