Question about 1992 Ford Crown Victoria

2 Answers

Stall in my tranmission 1993 crown victoria

My transmission has went into stall in one day, the car won't shift into gear, but if I give it some gas, it will creep, what can it be, other than going completely.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did you check the fluid level and color? good place to start or........you can find a tranny installed for around 700$ max on your 93. if it stalled one day, i take it that it wasn't top notch. invest 700$, make sure you get a 90 day warranty and bust balls for any little thing you feel wrong with the new tranny. i did exactly that now my STOCK 93 is running 16.1 on the quarter mile

Posted on Jan 03, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

I take it that this vehicle has an Automatic transmission, if Yes then service it, there is a filter inside right at the bottom and it is blocked because it hasn't been changed for a long time

Posted on Nov 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 crown vic transmission slipping


Change the filter and fluid. This car if the transmission is original should have a torque converter drain. Drain the torque converter also,it gets almost all the fluid out of the transmission. Doing this the car will require almost 12 quarts of fluid. Worth a shot. I change mine at 25000 mile intervals.

Oct 31, 2012 | 1998 Ford Crown Victoria

2 Answers

2003 crown victoria won't come out of park


Had a similar problem. Solved it two ways first place key in the 3 position move gear to N then start and it will shift easily. Second solution check brake light fuse, it is probably blown replace it and gears will shift OK.

Jul 01, 2012 | 2003 Ford Crown Victoria

1 Answer

Why my 2007 crown Vic won't shift in gear


this can be due to out of adjutment of shifter cable which releases the shifter when brake is pressed.

Nov 18, 2011 | 2007 Ford Crown Victoria LX Sedan

1 Answer

I have a 93' ford crown victoria and sometimes it wont go in reverse yet all the other gears work fine


Sounds like a bad reverse band problem...
be ready to replace the transmission soon.

May 03, 2011 | 1993 Ford Crown Victoria

1 Answer

I have a 1998 ford crown vic police intercepter and the transmission is sticking in first gear and when i let off the gas it shifts. what could be the problem? and oh i already did a trans flush.


thereis a transmission module i believe, and that tells it when to shift. if they didn't have them in that year model, then a vacuum line will also cause that

Nov 12, 2010 | 1998 Ford Crown Victoria

1 Answer

2000 Crown Victoria lurching when shifting from 3rd to 4th gear (when overdrive enabled).


electronic shift control bad. you would have to take to tranmission shop to be checked by computer or shift control linkage to throttle body needs adjusting. berrydalewolf

Oct 26, 2009 | 2000 Ford Crown Victoria

1 Answer

Sluggish and no pwer up a hill. Almost backfiring in second gear.


Yea probably the bad gas clogged the filter or clogged an already dirty fuel filter. Try changing it. If not I would say try using a lower gear by turning off the overdrive.

Jul 21, 2009 | 1993 Ford Crown Victoria

1 Answer

Transmission won'y shift into higher gears


It could be a bad vacuum hose or a bad solenoid. Check fluid condition and level first. A Chilton or Haynes repair guide will tell you what you need to know about placement of hoses and solenoid.

Jan 25, 2009 | 1987 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...