Question about 2006 Chevrolet Cobalt

1 Answer

Cobalt Blower Chirp

I found this post from June
http://www.fixya.com/cars/t661265-air_conditioner
where you stated that a chirping noise from my blower on low could be a bad blower motor resistor. I am having this same issue with my 2006 Chevy Cobalt. It always makes an annoying chirping noise when my blower is on low and a little be on the second lowest setting as well. Do you think this would solve my problem? Any help would be appreciated.

Posted by on

  • 2 more comments 
  • gehlhausen Nov 21, 2008

    I was wondering if the resistor will fix this or do i need to replace the whole blower motor?

  • JCMAINSIII Dec 04, 2008

    I have teh same problem. On the lowest two blower setings the chrips and even after you shut the blower off it chirps as the blower 9assuming a fan of some sort) slows down, Is this a lubrication issue? Were is the fan/blower located or how accessible is it?

  • johnny8585 Feb 02, 2009

    i have the same problem, did anyone find a solution for this yet?

  • megmulv Mar 19, 2009

    Ha ha how funny.. The same thing happens with mine. The cobalt is good for the gas mileage but overall a cheaply designed car. And to think I spent over $20,000 on this car back when, and now they are advertised on TV for $13,000. Makes me sick.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

IT'S A CHEAP CAR!!!!!

Posted on Mar 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the Hazzard flasher found in a 2008 Chevy Cobalt?


My searches indicate that it is not in the fuse box where it should be. The flasher relay is shown under the left side of the dash console, but then I found this.

The Chevy cobalt does not have a flasher relay, the cobalt turn signals are fully solid state and run through the PCM (powertrain control module) in the car, the sound comes from your speaker in the front left.
http://www.fixya.com/cars/t26193585-4_ways_flasher_located_in_2008_chevy


http://wiringmanuals.blogspot.ca/2014/08/2008-chevrolet-cobalt-engine.html#more
Wiring Diagrams and Free Manual Ebooks

May 13, 2016 | Cars & Trucks

1 Answer

One tire not showing pressure replaced tire sensor still not


After TPMS sensor replacement or tire rotation, reprogramming is required. 1. key on engine off, parking brake on. 2. turn park lights on and off 4 times you will hear a horn chirp twice, you are in program mode. Start at L/F tire release air for 10 seconds, wait 15 seconds until horn chirp, after chirp go to R/F tire do the same until horn chirp then R/R let air out til the chirp then L/R do the same after the L/R chirp, turn key off and you are done, note you have only 5 min. to complete. If you do not hear horn chirp at each tire, you will have to start from beginning. When complete, remember to add air to each tire, 35 psi is recommended.

Jan 27, 2014 | 2005 Chevrolet Tahoe

1 Answer

What does service tire monitor mean on a 2005 chevy tahoe means


It means you have a malfunction in the TPMS system. First you can try to do a reset as follows: 1. key on, engine off, parking brake on. 2. turn park lights on and off 4 times you will hear a horn chirp twice, you are in program mode. Start at L/F tire release air for 10 seconds, wait 15 seconds until horn chirp, after chirp go to R/F tire do the same until horn chirp then R/R let air out til the chirp then L/R do the same after the L/R chirp, turn key off and you are done, note you have only 5 min. to complete. If you do not hear horn chirp at each tire, you will have to start from beginning. When complete, remember to add air to each tire, 35 psi is recommended.
If that does not work you probably have a bad TPMS sensor, which will have to be replaced. Some auto parts stores will test your sensors for free, so check around.

Apr 01, 2013 | 2005 Chevrolet Tahoe

1 Answer

What is the actual name for the knob that controls how hard the fan blows? example- the know says 1-2-3-4. I have a 2005 cobalt and cant seem to figure out what it is called to get it replaced


Hi, it's called the blower switch, but I believe your switch is integrated into the control panel. So the panel is sold as a unit. Here is an example of what you would have to buy: http://www.automotix.net/usedautoparts/2005-chevrolet-cobalt-heater_and_ac_controls-inventory.html
Before buying this part, you may want to review my post at http://www.fixya.com/cars/r6234839-doesn_t_heater_or_air_conditioner_blow

Please let me know if you have more questions, and thanks for using FixYa.

Jan 15, 2011 | 2005 Chevrolet Cobalt

1 Answer

My 2003 V6 was making a chirping noise. it was diagnosed that the serpentine belt needed to be replaced. I sprayed a conditioner on it (was told to try this first). The noise went down but it still makes...


Serpentine belts are very durable , however they do need replacement from time to time. Chirping is caused by slippage which should NEVER happen exept when engaging air conditioner or high power items that put a load on the alternator. The belt is loose or one of the pully wheels it turns is having issues with a bearing--(its not turning freely) or the wrong belt was installed in the past.

Listen carefully where the chirp originates ie Power steering, alternator, Air cond-pump-, steady bearing or spring loaded tension wheel. If the belt looks good and feels firm and tight---the problem is one of the items listed.
Also check belt is lined up perfectly on its wheels and has not jumped over a notch or two. it visual!!

Jan 13, 2011 | Ford Taurus Cars & Trucks

3 Answers

I have a 2005 Jeep Wrangler Unlimited Rubicon - chirping noise


have a local repair facility look at the front and rear universal joints

Mar 09, 2010 | 2005 Jeep Wrangler

2 Answers

Rotated tires now sensors do not read correctly


If you are talking about your low tire pressure sensors, theres a button in the glove compartment. Press it for 5 seconds to reset the sensors.

Feb 04, 2010 | 2005 Chevrolet Tahoe

1 Answer

97 Golf that makes a chirping noise


have you checked the CV joints, there only good for approx. 100,000 kms.

Sep 01, 2009 | 1997 Volkswagen Golf

1 Answer

Have a 2008 Chevy Cobalt, tire sensor is staying on all the tire, not reading the tire pressure at all, has 2 dashes instead. Called and talked to dealership mechanic, he said that re-registering the...


On vehicles equipped with keyless entry, simultaneously press the keyless entry transmitters lock and unlock buttons until a double horn chirp sounds indicating the Learn Mode has been enabled. The left front turn signal will also be illuminated....Next
  • Increase/decrease the tire pressure for 8-10 seconds then wait for a horn chirp. The horn chirp may occur before or up to 30 seconds after the 8-10 second pressure increase/decrease time period has been reached. Once the horn chirp has sounded, the sensor information is learned and the turn signal in the next location to be learned will illuminate....Next
    1. After the horn chirp has sounded and the right front turn signal is illuminated, repeat step 2 for the remaining 3 sensors in the following order:
    1. Right front
    2. Right rear
    3. Left rear
    4. When the left rear sensor has been learned and a double horn chirp has sounded, the learn process is complete and the RCDLR exits the learn mode.
    5. Ignition OFF, adjust all tires to the recommended pressures. Refer to Vehicle Certification, Tire Placard, Anti-Theft, and Service Parts ID Label

    Jul 29, 2009 | 2008 Chevrolet Cobalt

    1 Answer

    Air conditioner


    sounds like ur blower motor resisters are faulty

    Jun 10, 2008 | 2005 Chevrolet Cobalt

    Not finding what you are looking for?
    2006 Chevrolet Cobalt Logo

    1,315 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    70346 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22041 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6864 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...