Yes I gapped the platnuim plugs @.050 and the old ones were.022 or higher and were champion and it act like it wanted to turn over but started dragging. Spin fast then slow like it needs a jumpYes I gapped the platnuim plugs @.050 and the old ones were.022 or higher and were champion and it act like it wanted to turn over but started dragging. Spin fast then slow like it needs a jump
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check your switch that runs to your aternator.make sure is grounded .if not get a sand paper and sand it down.also check the switch that plugs in to the alternator.
i would check and see if spark pluges are firing. you can take one out and plug into spark plug wire then let the bottom of the plug sit on engine and get someone to try to start while you look at the plug to see if there is any fire. if you have no fire or fuel it would be the crankshaft sencer. it could be the timing belt but the motor would sound different turning over then it used to.
probly need a tuneup-change plug wires and distributer cap--------clean throttle body and idle control motor---------get a scan and data stream done as an option
×