- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Do not install the OEM starter - it only works from about 80 feet away and is quite problematic. I just purchased a new V6-AWD with the push button start and the dealer is taking the OEM start out as we speak and taking it for an after market starter.
If you decide to do it yourself (you'll need to be quite mechanically inclined for this install), check youtube as the poster above has suggested - but again I highly suggest you consider an aftermarket starter and save the money that I didn't.
Did you try to boost battery? Sounds like low charge. Check battery terminals for tight and clean as well as groung connection at body and power connection at starter for clean. If battery OK test for power on starter wires. Large wire will have contant battery power small wire will have battery power when key is in crank position. If power ok on both it will probably need a starter. Hope this helps...Good Luck.
you haven't explained if engine is turning over when you say "wont start" if it wont turn over,could be starter motor sticking, when you say wiggle cable do you mean battery leads
if red , clean connection at starter motor/solenoid