No brake lights the fuse is okay the brake sensor works fine the wires have been tested the sockets have been changed when i turn the marker lights on the front and rear marker lights come on but the brake lights DO NOT WHEN I PRESS THE BRAKE PEDAL PLEASE HELP THANK YOU SAM
This sounds like Brake Light Switch, can be found at any local parts store, for under $15 and easy enough to replace. The switch is located under the brake pedal and depresses when you hit the brakes, causing the brake lights to turn on. Replacing this is cheap and easy.
SOURCE: 1991 Accord Honda Rear Brake Lights Stay On,
they have a plastic screw that breaks under the petal. any bolt that you can fit in the hole will fix the problem.
SOURCE: No juice to the third brake light in a 93 honda accord
The right brake light sensor is located in the trunk area by the right rear taillight assembly.
SOURCE: 1991 Honda Accord brake light probelm.
Check the prones inside the connector that you plug into the brake light module. You may have to squeeze, wiggle, tilt each one to see which one is not connecting all that good. I know it may sound confusing. I tried to explain the best of I could.
SOURCE: Brake lights dont work
Check if you have electrical current at brake light switch.If not go back to checking the fuses and plugs.
SOURCE: car brake lights won t turn off when car is shut down 1996 Honda Odyssey
It should be your brake light switch. There is a little plate welded to the arm of the pedal that has a hole with a rubber stopper. The rubber stopper is most likely missing, or damaged. You should be able to take a flashlight and see the plate and the switch. If the hole is plugged up, you will need the brake light switch, if not, replace the plug.
649 views
Usually answered in minutes!
×