When i open any of my door in my 1995 gmc safari van the dash lights and blinkers flash and as soon as i start up the van the lights stop flashing. What may be the problem? is it a relay of some sort? im just not sure.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Did you try the door switches? Pull the fuse, Unscrew and disconnect he wiring- DON'T let it pull back into the door. Tape it down, but don't let the wire touch anything. Replace the fuse. Is the light off? YES. Replace the switch. NO? Repeat the above steps for each door switch. Find the culprit and replace it. If the lights continue to stay on, then go to the dash panel and replace the panel switch where the panel dimmer wheel is at. I think the entire headlight switch may have to be replaced if there is no wheel on the dash. Hope that helps.
you would have to pull out the interior pannel and and unlock it with a screw driver the latch has a small hole that you could fit the screw driver in and it will release the door latch I have open various doors with a broken handle and it seems that you could do the same good luck.
You'll need to remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. then you just remove the bolts to the mirror
All the door switches use the same wiring harness. It's an orange and a white wire. There is a switch on the dash to turn the dome and wheel lights off. If the lights come on with the dimmer, the whole harness is OK, so now check to see if that switch is turned off... or bad