Question about 2001 Mitsubishi Eclipse

Open Question

2001 Mitsubishi Eclipse Factory radio harness pin outs?

I need to know how the wires going into the back of the radio connect into the white wire harness. Basically which colored wires go to what pin on the stock infinity cd player/radio. Any help would be appreciated.

Posted by on

1 Suggested Answer

  • 3 Answers

SOURCE: need wiring information for harness on stock infinity cd player

Uhm need more information here.

Posted on Dec 29, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Radio install


Go to a pro or radiostore for help. Ur library sec 600 has info. Utube

Aug 14, 2016 | Cars & Trucks

2 Answers

00 Mitsubishi Eclipses factory or stock wiring harness color diagram


You need to provide more information on what you need help with . If you are putting in an after market radio, you can get a wiring harness that will just plug into your radio harness and with the instructions you can wire this yourself. Usually simple. Go to a good parts house for parts and help.

Feb 24, 2015 | 2000 Mitsubishi Eclipse

1 Answer

Hey needed wiring diag. for radio $ AC with all white wire


$ , and AC? and what is all white.
first off what are you doing, we dont know,
1: factory 01 radio for 01 swap?
2 factory 01 for 2010 swap factory?
3: after market to stock 01 harness?
but if #3 , which i suspect, then this is in the FSM read that.
or login to alldata.com
or go to walfart or any store that sells this (auto) and get
the factory harness kit, for your car, this has a real factory
connector on one end and wires to your new aftermarket radio.
this is best, and far better than hacking up any car harness.
(reSale-ablity)

Feb 04, 2014 | 2001 Toyota RAV4

1 Answer

The mode button for radio and security will not work


12 yr old factory radio doesn't work? Button electrically is probably just shot.. Can try a salvage yard or maybe just get a cheap aftermarket radio & install. Don't forget the plastic dash kit and wire harness adapter.

Sep 02, 2013 | 2001 Mitsubishi Eclipse

1 Answer

My speedometer not working? is it cause of the after-market radio i put in be the reason.. mitsubishi galant 2002 6 cylinder


So we can rule out the speed sensor and its circuit to the PCM.

I just checked through another area of my database and it seems the speed sensor is systated as on the side of transaxle, near firewall, maybe you can dheck that out to confirm, just out of curiosity and for future reference and some portion of testing requires unplugging the conections.

Anyway I will provide a complete diagnostic pocedures for you to check through and hope an answer is found.

PS. After going through the diagnostic procedure, I believe your radio is the cause of the problem. Refer to # 10

SPEEDOMETER DOES NOT WORK

1. Connect scan tool to data link connector, check for Diagnostic Trouble Code (DTC). If DTC P0500 (Vehicle Speed Sensor) is set, diagnose this DTC first. Go to step 6 . If DTC P0500 is not set, go to next step.

2. On Eclipse, if trip odometer is not working normally, go to next step. If trip odometer is working normally go to step 5. On Galant, if tachometer is not working normally, go to next step. If tachometer is working normally, go to step 5

3. Disconnect instrument cluster connector. Turn ignition switch to ON position. Connect DVOM between ground and instrument cluster connector terminal No. 52 (Black/White wire) on Eclipse or terminal No.29 (Black/White wire) on Galant. If battery voltage is present, go to next step. If battery voltage is not present, check harness connectors and harness wiring between instrument cluster and ignition switch for damage. Repair as necessary.

4. Using a DVOM, check resistance between ground and instrument cluster harness connector terminal No. 34 (Black wire) on Eclipse or terminal No. 30 (Black wire) on Galant. If resistance is less than 2 ohms, replace instrument cluster printed circuit board or speedometer and tachometer. If resistance is greater than 2 ohms, check instrument cluster connector and harness wiring. Repair as necessary. If connector and wiring are okay, go to next step.

5. Disconnect vehicle speed sensor connector and instrument cluster connector. Turn ignition switch to ON position. Connect DVOM between ground and harness side of instrument cluster connector terminal No. 29 (White/Blue wire) on Eclipse or terminal No. 16 (Yellow/Black wire) on Galant. Voltage should be 5 volts. If voltage is okay, repair or replace instrument cluster printed circuit board or speedometer and tachometer. If voltage is not 5 volts, check instrument cluster connector and harness wiring. Repair as necessary. If connector and wiring are okay, go to next step.

6. Disconnect vehicle speed sensor harness connector and connect DVOM to harness side. Check vehicle speed sensor power supply voltage between terminal No. 1 (Black/White wire) on Eclipse or (Black/Blue wire) on Galant and ground. Battery voltage should be present. If voltage is okay, go to next step. If voltage is not present, check vehicle speed sensor harness connector and wiring. Repair as necessary.

7. Using DVOM, check resistance between ground and vehicle speed sensor harness connector terminal No. 2 (Black wire). Resistance should be less than 2 ohms. If resistance is greater than 2 ohms, check instrument cluster connector and harness wiring. Repair as necessary. If connector and wiring are okay, go to next step.

8. Disconnect vehicle speed sensor harness connector. Connect DVOM between ground and harness side terminal No. 3 (White/Blue wire) on Eclipse or (Yellow/Black wire) on Galant. If 9 volts are not present, check vehicle speed sensor harness connector and wiring. Repair as necessary. If 9 volts are present, go to next step.

9. Check harness wiring between vehicle speed sensor connector to radio and tape player connector, auto-cruise control ECU ECM (M/T) or PCM (A/T) connector and instrument cluster connector. If connectors or wiring are damaged, repair as necessary. If connectors and wiring are okay, go to next step.

CAUTION: To prevent damage to scan tool, always turn ignition off before connecting or disconnecting scan tool.

NOTE: If ECM (M/T) or PCM (A/T) is replaced, immobilizer-ECU should also be replaced. Each ECM (M/T) or PCM (A/T) has an encrypted code for immobilizer-ECU, and is registered in immobilizer-ECU.

10. Connect scan tool to data link connector. Turn ignition switch to ON position. Read DTC. Disconnect radio and tape player connector. If DTC P0500 does not reset, replace radio and tape player. If speedometer does not work, disconnect auto-cruise control ECU connector. If DTC P0500 does not reset, replace auto-cruise control ECU. If speedometer does not work, disconnect instrument cluster harness connector. If DTC P0500 does not reset, replace instrument cluster. If DTC P0500 resets when any connector is disconnected, replace ECM (M/T) or PCM (A/T).
9_6_2012_10_56_48_am.gif9_6_2012_10_57_03_am.gif9_6_2012_10_57_17_am.jpg9_6_2012_10_57_28_am.jpg9_6_2012_10_57_39_am.jpg9_6_2012_10_57_52_am.jpg9_6_2012_10_58_05_am.jpg9_6_2012_10_58_16_am.jpg

Sep 06, 2012 | Cars & Trucks

1 Answer

Trying to find wiring harness for the headlights. They melted.


try the dealer they should have just the plugs with wires and you will have to connect them to the original wires or you can look on web at parts stores see if they have them you can get the factory harness but would have to replace the entire underhood harness for the headlites and will melt again

Jul 16, 2010 | 2001 Mitsubishi Eclipse Spyder

2 Answers

Need radio wiring diagram for 2001 mitsubishi eclipse


CHeck HERE the 2001 diagram.

Hope helps (remember rated this).

Jul 05, 2010 | 2001 Mitsubishi Eclipse Spyder

1 Answer

How do I wire a remote door lock to my 1995 mitsubishi eclipse , what are the wire colors for the power door locks?


Hope this helps. It's for a 2004 eclipse remote start.

12volts white/red (40A) + ignition harness
Starter black/red + ignition harness
Second Starter N/A
Ignition green + ignition harness
Second Ignition N/A
Third Ignition N/A
Accessory blue/red + ignition harness
Second Accessory blue/black + ignition harness
Keysense blue/red ignition harness
Notes: This wire rests at ground, and goes to an open circuit when the key is inserted into the ignition cylinder.
Power Lock purple - pin 33 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Power Unlock lt. green/red - pin 34 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Lock Motor lt. green 5wi pin 19, 28 pin plug below fuses
Unlock Motor green/red 5wi pin 22 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Parking Lights+ green/white + pin 2, 15 pin plug above fuses
Parking Lights- N/A
Hazards green - pin 55 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Turn Signal(L) green/blue + pin 8, 15 pin plug above fuses
Turn Signal(R) green/yellow + pin 13, 15 pin plug above fuses
Reverse Light red/blue + pin 9, 43 pin plug in driver kick
Door Trigger see notes - see notes
Notes: The driver door trigger is lt. green, pin 6, in a 15 pin plug above the fuses. The passenger door is lt. green/black in pin 65 at the ETACS ECU. Use both wires and diode isolate each.

The ETACS ECU is attached to the back of the fuse box.
Dome Supervision green/orange - pin 1, 3 pin plug above fuses
Trunk/Hatch Pin red - pin 62 or 37 at ETACS ECU
Notes: It is in pin 62 on the coupes, and in pin 37 on the convertible spyders.

The ETACS ECU is attached to the back of the fuse box.
Hood Pin green/red - pin 24 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Trunk/Hatch Release green/white 5wi pin 32 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Power Sliding Door N/A
Factory Alarm Arm lt. green/black - pin 42 at ETACS ECU
Notes: Meter this wire while turning the key in the driver door key cylinder.

The ETACS ECU is attached to the back of the fuse box.
Factory Alarm Disarm orange - pin 25 at ETACS ECU
Notes: Meter this wire while turning the key in the driver door key cylinder.

The ETACS ECU is attached to the back of the fuse box.
Disarm No Unlock blue/red - pin 27 at ETACS ECU
Notes: Meter this wire while turning the key in the hatch/trunk key cylinder.

The ETACS ECU is attached to the back of the fuse box.
Tachometer white or black/white ac engine speed detection connector
Notes: The engine speed detection connector is a single pin connector in the fuse/relay box under the hood.

Can also go to one of the ignition coils or the distributor assembly and use the black/blue or white/green wire.
Wait to start N/A
Brake Wire green/orange + brake pedal switch
Parking Brake yellow/green - parking brake switch
Horn Trigger lt. green/black - pin 44 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Memory Seat 1 N/A
Memory Seat 2 N/A
Memory Seat 3 N/A
Interface Module: Category:
Immobilizer Bypass Required:
Yes Type:
Transponder
Part #: 556UW
Alternate Part1 #: DesignTech 20402
Alternate Part2 #: DesignTech 29402
Notes: Standard on all models.

Good luck.

Mar 02, 2010 | 1995 Mitsubishi Eclipse

Not finding what you are looking for?
2001 Mitsubishi Eclipse Logo

Related Topics:

367 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...