Question about 1991 Eagle Talon

1 Answer

What causes my 1991 eagle talon engine to run rough?

We have put in a near new factory installed motor,and ignition coil,cam angle sensor,ecm,starter motor,o2 sensor,tune-up,rebuilt efi,had 2 different emmission control services,it has passed aircare,but still runs rough!//new exhaust system.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

If the emissions control didnt check the egr valve check that. otherwise the idle air control motor/servo. also look for vacuum leaks.

Posted on Dec 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 91 eagle talon won't get a spark it just cranks


try crank position sensor.cam sensors are mostly for monitoring misfires. cam sensor doesnt determine spark timing

Dec 17, 2011 | 1991 Eagle Talon

1 Answer

Kill switch on fuel pump relay switch


If your timing belt is slightly off by a tooth or more it wont stay running. if the cam and crank sensors dont see the same #1 strock at the same time it causes rough running and stalling problems, as for your viper reach under your dash and take the fusses out. this will dissable it.

Dec 15, 2011 | 1991 Eagle Talon

1 Answer

I wash the engine and run 2days. NOW DONT START. I PUT A NEW COIL. THE CAR DONT HAVE SPARK FIRE.


The cam angle sensor is located on the left of the cylinder head, you could have damaged it while you were cleaning the engine. To check it, disconnect the hardness connector for the camshaft position sensor, turn the ignition key to ON and measure the supply voltage on terminal number 3, it should be about 12v, Then check terminal 2 on the harness side for signal voltage, it should be 4.8 to 5.2 volts.

Apr 13, 2011 | 1991 Eagle Talon

1 Answer

I have 95 talon esi . got spark to coil coil is new changed crank positioning sensor still no spark what next


Dear Sir,
As you saying you have replaced ignition coil and crank sensor, next is check relay fro ignition system in fuse box replace relay with other one for testing purpose only, if no change then next,if you can check continuity of all wire form Engine Control Unit to Ignition coil, if all wire are ok then replace Engine Control Unit (ECM) if any wire found no contunity please reconnect same wire or repair wire it will solve problem if not then you have to replace ECM. thanks.

Oct 26, 2010 | 1993 Eagle Talon

2 Answers

I have a 93 Eagle Talon with good fuel pressure and no spark


could be crank & cam sensor if they do not meet in sinc they will not get spark

Nov 13, 2009 | 1993 Eagle Talon

1 Answer

Eagle talon has no spark.


i have the same problem with my car i put a crank and cam sensor, a whole other coil pack, and an ignition control module the only thing i have left to do is put a computer in it. if you find a solution email me at s300624928@students.rio.edu

Apr 17, 2009 | 1993 Eagle Talon

2 Answers

Can i bplt up a eclipse 2.0L 420a non turbo to a 95 eagle talon non turbo


yes. they are exactly the same.

NOTE:
  • the 95-96 year models, have a few sensor plugs that are different than the 97-99 models. such as the coil pack and the cam angle senor.

Jul 21, 2008 | 1994 Eagle Talon

2 Answers

1995 Eagle Talon Will not start


check the mass air flow sensor, if this is bad then the ecu wont get a signal and it wont send the right amount of fuel to the cylinders causing a no start condition

Jun 25, 2008 | 1995 Eagle Talon

Not finding what you are looking for?
1991 Eagle Talon Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Stewart Dibbs

Level 2 Expert

267 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...