Question about 2000 Dodge Caravan

1 Answer

How to replace serpentine belt?

I need to replace the engine serpentine belt on my 2000 dodge grand caravan. it's 6 cyl with 3.3 liter engine automatic. also to replace the AC clutch or compressor. can you pls tell me how to do both of them?
thanks,
roberto

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How to remove and re-install serpentine belt?

Posted on Nov 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the firing order for 2006 grand caravan 6 cyl


Hi , could you supply the correct engine code and vin number ?
For the engine code (EKG) the firing order is 1-6-5-4-3-2
For the engine code (EGH) the firing order is 1-2-3-4-5-6

Jun 07, 2014 | 2006 Dodge Grand Caravan

1 Answer

Diagram for 2010 dodge caravan serpentine belt 3.3l


i need to see a diagram for a 2010 dodge grand caravan with a 3.3 liter It has air condtion

Aug 08, 2012 | 2010 Dodge Grand Caravan

1 Answer

How do i change the water pump on a 2000 dodge,grand caravan


Removing and changing the water pump on a 2000 Grand Caravan should only be done if your van has a 3.3 liter or 3.8 liter V6 engine. On any other engine types, including four-cylinder engines, you must remove the timing belt from the engine to access the water pump, which is a dangerous task that can mess up the engine if attempted by an amateur.
The procedure is as follows:------------- The water pump is responsible for sending the engine coolant to the engine.First of all remove the serpentine belt then remove the plastic cove on the passenger side behind the wheel. You will have to remove the pulley. Once the pulley is removed unbolt the water pump and remove it. Clean the surfaces and install new pump. Draining the coolant and replacing it is advisable.
Drain the engine coolant, twisting and removing the drain plug at the bottom of the radiator
-------------------Thats it.

Nov 18, 2010 | 2000 Dodge Caravan

1 Answer

Need to replace serpentine belt on 2000 dodge caravan,,6 cyl,,air,,,, email cntrywv1@ayhoo.com


OK, do you have a specific question? You'll need to jack up the front right tire and remove it. Pull the wheel well cover off to expose the belt. Use a vice-grip in the tensioner pulley (look for a 1.2 in square on the end of the pulley) to remove tension. Install as the sticker under the hood shows.

Jan 24, 2010 | 2000 Dodge Grand Caravan

1 Answer

Replace serpentine belt on a jeep grand cher w/4.7 liter engine


It's posted inside the hood. Lift hood, look on passenger side.

Nov 16, 2009 | 2000 Jeep Grand Cherokee

1 Answer

I'm looking for instructions to replace serpentine belt on a 2003 Dodge Grand Caravan (6 cyl) and a diagram of the belt's path. Thanx!


You can check out the autozone.com website and register the vehicle. It's free and you will have access to an online repair manual for the vehicle. The steps for changing the belt and the routing diagram should be available there. Hope this helped and best wishes.

Aug 18, 2009 | 2003 Dodge Grand Caravan AWD

2 Answers

I need to replace the alternator on my wife's 2000 dodge grand caravan sport. How do I go about this?


moz-screenshot.jpgmoz-screenshot-1.jpg Removal & Installation

3.0L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove or disconnect the following:

    Negative battery cable Wiper module Accessory drive belt Alternator mounting bolts Alternator harness connectors Alternator

To install:
  1. Install or connect the following:

    Alternator Alternator harness connectors Alternator mounting bolts. Tighten the bolts to 40 ft. lbs. (54 Nm). Accessory drive belt Wiper module Negative battery cable
  2. hope this helps let me know if you need more. dc

Jun 24, 2009 | 2000 Dodge Grand Caravan

1 Answer

2000 dodge grand caravan 6 cyl 3 liter engine


check the ground cable all the way from the battery to engine im betting its loose or not getting a good connection somewhere

Aug 18, 2008 | 2003 Dodge Caravan

2 Answers

Serpentine belt replacement


What engine do you have? The 3.3 and 3.8 engines have a single serpentine belt, and a belt tensioner, so no adjustment is needed. Did you replace the tensioner, and want to know how much to torque it? countrycurt0

Jul 20, 2008 | 1998 Dodge Grand Caravan

Not finding what you are looking for?
2000 Dodge Caravan Logo

677 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...