Question about 2001 Buick LeSabre

1 Answer

Replace 2001 lesabre tail light lense

Need directions on how to replace the lense of my wife's right rear tail light lenses

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 393 Answers

Peel rug back from wall of trunk. there are bolts holding lense in/also they may look like tie down hooks they are actually nuts.

Posted on Nov 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change tag light


Open the trunk. Remove the fabric cover. Remove the ten or so nuts holding the rear lens assembly to the trunk lid. Remove the rear lense assembly from the trunk lid. There are six bulbs, part number 194, in this lense assembly. Two or the lisence plate and four for the tail lights. I would recommend replacing them all as long as you have it disassembled.

Jan 15, 2012 | 2001 Buick LeSabre

1 Answer

HOW DO YOU CHANGE THE REAR TAIL LIGHTS ON A 1998 CROWN VIC?


Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

Jul 05, 2011 | 1998 Ford Crown Victoria

1 Answer

How do i remove the rear bulbs in an audi tt 4x4


Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

May 27, 2011 | 2002 Audi A4

1 Answer

How to replace rear brake light hyundai getz 2004


Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

May 15, 2011 | Hyundai Motor 2004 Accent

1 Answer

How to change back brake light bulb n/s


Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

Apr 30, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

How to replace right rear taillight assembly


Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

Apr 01, 2011 | 2002 Lexus RX 300

2 Answers

I cant seem to find out how to remove the tail light to replace the bulb. what am i missing?


Typically, the entire tail light assembly has to be released from the inside. So you have to remove trim, inside, for access, usually 3 or 4 thumbscrews get released and the whole thing comes out. This set up is much more watertight than the older method of lense removal.

Mar 26, 2011 | 1993 Buick Roadmaster

2 Answers

I'm trying to identify a tail light lense that I believe to be 1973 Pontiac tail or rear side marker. The raised portion of the lense is 7/8" X 7" and it says PMD 35A SAE P1A 73 on it It has...


Can you upload an image of the lens? Perhaps your internet service provider has an area that will allow you to upload an image, then you can paste the link to this post so I can view it?

Dec 29, 2010 | Pontiac Catalina Cars & Trucks

2 Answers

Replace third tail light bulb


Check vacuum hoses to tranny for leaks or just change if not sure. Tranny repairs $1000 and up.

Jul 25, 2009 | 2002 Isuzu Axiom

1 Answer

Replace tail light bulb


The process for changing the tail light bulbs for a 2002 New Beetle in my case a TDI is relatively simple. To remove the lense and gain access to the bulbs you first need to release the lense holder from inside the trunk by completely unscrewing the large plastic wing nut that is under a round plastic panel that's located almost directly behind the rear brake light lense. To gain access to the plastic wing nut remove the round panel by gently prying it off. After this is done you release the lense by using something flat like a dinner table knife to pry and release the clip that holds the lense in place. Locating the clip: The rear fender has two seams that end at the light lense, the inboard seam (the one closest to the hatch)is where you want to insert the table knife to pry the metal clip that holds the lens in place. Gently and carefully insert the knife blade directly at the seam and pry upward to release the lense. Once the clip releases pull the lens the rest of the way and remove the bulbs by turning the bulb holder sockets couter-clockwise. After this is done remove bulbs by slightly pushing down on the bulb and turning it counter-clockwise. The reinstall is reverse of the removal the procedure.When re-installing take care to clock the lense where the metal clip and the lense protrusions end up in the same position as before. Note: you may need to assist sliding the lens retaining clip in with the knife when reinstalling! Good luck

May 15, 2008 | 2003 Volkswagen New Beetle Convertible

Not finding what you are looking for?
2001 Buick LeSabre Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...