The car is getting compression air and fuel but will not start, it cranks n acts like it will start but just wont. replaced battery, spark plugs, distributor, ignition coil, the whole ignition system, and the computer and still nothing.
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have spend a lot of money on parts, have you invested in a Compression Tester or I believe you have Blown your Head Gasket, Cracked your Head. You are now getting Blow By and it is going into your System.
YOUR problem with your Raw Fuel getting into your Exhaust is due to the LAck of compression to Ignite the fuel.
It could also be a Bent or Swallowed Valve.
A Cylinder Leak Down Test will help you resolve this issue.
As you are finding out ....this is how you kill a car. You need fuel, spark, compression, and air to run an engine. Look for spark and fuel items to be working. A computer controls much of the spark part. They canbe sensitve electrically. If you are cranking ..starter sounds ok. Alt. will act up after you get started. concentrate on spark and spark control. Fuel and fuel control. This is what you need to start.
your electronic fuel injectors should have a similar connector as another make sure you didn't connect the wrong piece to you electronic fuel injection wires, the connection should be a 2 hole plug and should run from the coil to the intake
If you are getting spark to the plugs, (and assuming nothing has happened to screw up the timing of the spark), the only thing that would cause the car not to start is that you are not getting fuel into the cylinders. You can check this by squirting some ether into the air intake of the engine. You can get some start spray at an auto parts store.