Question about 1984 Toyota Corolla

1 Answer

Cant change gears

First started it was just hard to get into any gear. now it wont go in any gear at all - the car starts ok. if I put in in first witht he car off, it jumps and stalls when I start the car.
I looked under the hood and found a belt (not broken but just sitting on top) near the cluch fluid top. its not a clutch cable - it looks like a belt about 1 foot in diameter. It is not the belt to the fan or the one under that.
Please help - Thanks

Posted by on

  • countdownfan May 11, 2010

    how long has it been hard to shift? my Corolla's transmission is going out, and its hard to get into gear, but it still goes with force. OR your syncros could be out? if not that then i dont know. please give some feed back thank you.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

IF THE PEDAL IS LOW CHECK FOR AIR IN THE SYSTEM. IF THATS NOT THE PROBLEM YOU WILL HAVE REPLACE THE CLUTCH MABY A COLLAPSED PRESSURE PLATE

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Isuzu kb250 diesel engine model 2008 it doesn't want to take gears when running


YOU probably have a problem with the clutch not fully releasing when you are driving.


Clutch Drag Kills Synchros

Feb 02, 2016 | Isuzu Cars & Trucks

1 Answer

Not all the time but when I start the car it starts very hard. When it starts hard like that and I wait a few second and put it into gear it slams into gear and sometimes won't move.


get it serviced?
hard starts are usually never getting a tuneup, (like spark plugs?)
slamming in to gear is normal if RPM is too high in park, is it.
wont move , in any gear, car wont move even in reverse.
and RPM of engine does what , sticks low, like 800 rpm
or screams at the advancement of right foot.
need lots of details. we cant drive car, but if could in 5min flat all that is clear,
eg:
transmission slips
engine weak
engine racing in park too high.
wont start and misfires when it does.
is fuel fresh, not year old.
ever get a new air filter and fuel filter. if filter is outside tank.

Apr 21, 2015 | 2007 Jeep Compass 2.0

1 Answer

My 97 monte wont start on its own. very hard start, we have changed the oxygen senser, egr, plugs wires dont know what to do any ideas


OK so the problem is the timing chain and gear set. factory timing gears are nylon coated, so wear out in time. the eratic idle indicates wandering timing, controlled by timing gear set. suggest new ones that do not have nylon gears.

Mar 17, 2013 | Chevrolet Cars & Trucks

1 Answer

2006 S4 Clutch or Slave Cylinder?


ok replace the slave cylinder and bleed it

Jul 13, 2012 | 2006 Audi S4

1 Answer

2001 dodge interpid wont shift gears after you drive and turn it off


Sounds like a faulty transmission control solenoid.

Jan 27, 2012 | 2001 Dodge Intrepid

1 Answer

So i parked my car yesterday and took the key out to find out park, but reverse. now i cant start my car or change the gears! i can still put the keys in and out and turn it but the car wont start or shift...


Put the key in, turn it forward 2 clicks like normal. Make sure you push the brakes all the way down and then try to shift the gear to park. Ya, cars wont start in gear, they made that way. If it still wont go in gear, try turning the steering wheel left & right. Sometimes the wheel lock can mess with ya. If not still, you need to call a mechanic. Cuz actually, if you were in reverse instead of park, the key should have never came out. Also make sure the key is in ALL the way.

Feb 15, 2011 | 1997 Pontiac Grand Am

2 Answers

As you've probably heard before my 91 cav starts fine gets warm stalls at lights starts right back up but cuts off when i put it in gear


pull off the transmission transition switch wire pluged on to tranny
start car drive should be fine never hook op again 0 money
or pay 700 dollars to install a new one
or buy switch pull tranny and install your self

Jul 14, 2010 | 1991 Chevrolet Cavalier

2 Answers

Won't shift into gear.


99 passat wont shift into reverse from park...locked up

Jun 06, 2009 | 2003 Volkswagen Passat

3 Answers

Nissan sentra 1997 starts but wont go when put in gear


is it a manual or automatic?if it's manual check clutch.if it is automatic check transmission fluid.

Dec 02, 2008 | 1997 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...