Question about 1994 Chrysler LeBaron

1 Answer

Radio removal for chrysler lebaron 1994

How do i remove it and put in a new one

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,674 Answers

Carefully pull off trim around area of stereo, and expose bolts holding it in. remove all screws in trim prior. here's a link that may help. although may not be exact.
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280251b5c

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the black and green wire attached to the 1991 Chrysler Labaron radio used for?


this may be the memory wire for the factory unit if putting in an after market radio you shouldn't need it

Jun 28, 2012 | 1991 Chrysler LeBaron

1 Answer

Changed head gaskets and now need to know how set timming on distributer and timing marks


Copy and paste the following free, direct Link. It has all the Timing Belt Diagrams with Marks you will need for your 1994 Chrysler LeBaron 3.0L.

http:/www.2carpros.com/car repair infomation/year/1994/make/chrysler/lebaron/1994 chrysler lebaror

Jan 27, 2011 | 1994 Chrysler LeBaron

1 Answer

How do I get to the water pump on a 94 Chrysler Lebaron GTC when the right motor mount is in the way?


simple remove the motormount, but you will have to support the engine, you can block it but not under the oil pan, good luck

Nov 20, 2010 | 1994 Chrysler LeBaron

1 Answer

What are the radio wire colors on a 1994 LeBaron?


For 1994 Chrysler LeBaron Car Radio Stereo Wiring Diagram check...

Car Radio Battery Constant 12v+ Wire: Red
Car Radio Accessory Switched 12v+ Wire: Red/White
Car Radio Ground Wire: Black
Car Radio Illumination Wire: N/A
Car Stereo Dimmer Wire: Orange/White
Car Stereo Antenna Trigger: Yellow
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Green
Left Front Speaker Negative Wire (-): Green/Yellow
Right Front Speaker Positive Wire (+): Violet
Right Front Speaker Negative Wire (-): Violet/Yellow
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Brown/Yellow
Right Rear Speaker Positive Wire (+): Blue/Red
Right Rear Speaker Negative Wire (-): Blue/White

Good luck (remember comment and rated this post).

May 04, 2010 | 1994 Chrysler LeBaron

1 Answer

Diagram for timing marks 94 lebaron 3.0litre


Click on the following free, direct Link. It has all the Timing Belt Diagrams with Marks you will need for your 1994 Chrysler LeBaron 3.0L.

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/chrysler/model/lebaron/1994_chrysler_lebaron_timing_belt_diagram_marks.htm

Apr 05, 2010 | 1994 Chrysler LeBaron

2 Answers

Do you have a diagram on how to install a serpentine belt on a 1994 Chrysler LeBaron?


1994 CHRYSLER LEBARON - V6 3.0L 2972cc 181ci GAS FI N 3

Open the hood, the diagram for the serpentine belt is on the cowling.

From DAYCO Catalog
Belt Routing Diagram (Alt., P.S., Idler & Tens.)
9e1b1eb.jpg


From comments to other users and Lebaron Owners; for remove, starting at the alternator pulley and going clockwise around the pathof the belt, the belt drops down and forward and goes under the idlerpulley, continues forward and less steeply downward and goes around thecrankshaft pulley clockwise, rises rearward going over the top or thetensioner pulley counterclockwise, then drops down and around the powersteering pump clockwise and rises to go around the alternator pulleyclockise (which is where I started the description). To loosen thetension to remove the belt, or to give you slack to install the beltwithout having to force it over a pulley while under tension you rotatethe tensioner pulley arm around its pivot clockwise according to the'94 shop manual. It doesn't show by what means to effect this rotation,but in the earlier manual I have ('89) it shows there to be a 1/2"square hole in the tensioner arm into which you insert a breaker barwith a 1/2" square drive which gives you the temporary lever to rotatethe tensioner against its spring action. I assume there is a similar1/2" square hole on the '94 you are working with. Interestingly,between '89 and '94 the idler pulley was added, and the requiredrotation of the tension arm changed from counterclockwise to clockwiseto relieve the tension."

I think this will help you get the belt on. Good luck.

Oct 13, 2009 | 1994 Chrysler LeBaron

1 Answer

Need to change fuel pump on 1994 chrysler lebaron 3.0 v-6


yes u need to drop the tank out. there is no underseat access.

Apr 11, 2009 | 1994 Chrysler LeBaron

Not finding what you are looking for?
1994 Chrysler LeBaron Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...