Question about 2002 Dodge Sprinter

2 Answers

LIMP MODE 02 SPRINTER WITH NEW TRANSMISSON. STILL IN LIMP MODE. HOW DO I GET IT OUT . HANK'S BILL

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

To many reset of limp mode set hard no reset in star code system. needs flashed to clear codes and for new transmission. Transmission control module may have oil wicking to it making it send fault codes remove cloth tape and clean with spray cleaner. check turbo hoses, replace TURBO RESONATOR with after market TURBO RESONATOR . Turbo air leak trip limp mode's.

Posted on Dec 31, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

You will have to have the fault codes read and removed. If it is permanently in limp mode it may suggest another problem.

Posted on Mar 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do my sprinter 2500-2007 goes into LIMP MODE only at start not while driving


You need to have it diagnosed. it is having a problem with start up. Guessing it only happens when cold too? Do you let the engine go through it's cycle before starting? Let the lights do their thing and the wait to start goes out? The new diesels don't like to be ignored.

Aug 04, 2014 | Dodge Sprinter Cars & Trucks

1 Answer

Transmisson in limp mode


Disconnect both negative and positive cables form the battery, touch them together, reconnect and try again. Computer will take a while to relearn.

Jan 12, 2014 | 2001 Mitsubishi Galant

1 Answer

Permanant limp mode


Limp mode why? there is a reason why it is in limp mode.

You will need to have the computer scanned for codes, the codes will help in finding the problem. there are many auto part stores that will scan the computer for free. get the codes and let me know what they are and then we can go from there.

Feb 03, 2013 | Dodge Sprinter

2 Answers

Engine management light flashing and power in limp mode


i am sick off my sprinter shuting down on motarways. What can i do to remove engine management

Jan 23, 2013 | 2010 Mercedes-Benz Sprinter Cargo

1 Answer

How do i get a 2003 vue out of limp mode


lip mode is to protect transmisson

Dec 10, 2011 | 2003 Saturn VUE

1 Answer

Wont run over 60mph displays code p4451 turbo super charger under boost


Your sprinter on limp mode now due to turbo resonator problem. Replace the resonator

Jul 08, 2009 | 2002 Dodge Sprinter

2 Answers

Chrysler concorde doesn't shift out of first


It sounds like it is in limp mode, this means that there is a transmission problem. The trans will go into limp mode to protect from further damage. You need to take it to a trans shop to have diagnostic test

Mar 04, 2009 | 1998 Chrysler Concorde

2 Answers

Fuel pump issues on sprinter 2007


doesnt sound like a fuel problem....check the charge air hose on the lower drivers side at the metal ring....they tear loose there and check the tubes going to the turbo....the green o ring has been known to go bad

Nov 08, 2008 | 2007 Dodge Sprinter

Not finding what you are looking for?
Cars & Trucks Logo

2,470 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...