Question about 1999 Honda Civic

1 Answer

Gears are stripped on drivers door window crank 1999 honda civic

Explain how to remove or please send diagram.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 193 Answers

First you are going to have to purchase another window regulator. Then you will have to remove the door panel and all material until you can access the window regulator.

At this point I can't go further until I know if it has manuel windows or power windows, because each is an entirely different operation.
Bill

Posted on Nov 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Honda Civic driver door window wire harness connector is bad


Try a wreckers that specialises in wrecking Honda for the harness.

Feb 22, 2014 | 1996 Honda Civic

1 Answer

06 honda civic lx window problem


this is covered in the FSM, buyone
or look at alldata.com under windows.
that's funny you need windows to see and fix windows in car, LOL

Jun 16, 2013 | 2006 Honda Civic Hybrid

1 Answer

I have a 4 door 1999 honda civic . the windows are opperated by crank instead of automatic . first i believe it came off track , so we pulled up the window till i could get it fixed . that night the window...


A new pane of glass would cost around 60-80 dollars. If you take the car to a shop you could get charged another 50-100 depending on their cost per hour. You can easily take care of the matter yourself however as it is an easy fix.

May 12, 2011 | 1999 Honda Civic

1 Answer

Stuck crank window, drivers side, 97 honda civic


1996-00 Civic 2-doors had a problem with the front windows binding or coming out of the run channel. The window regulator needs replaced and the rubber run channel needs inspected for damage and to make sure its properly seated into the window channels. note: make sure you install the window crank in the 10 o'clock position, so your not tempted to use the window crank as a door handle to pull the door shut. This can break the crank and/or the regulator. -Hope this helps:)

Jan 24, 2010 | 1997 Honda Civic

1 Answer

How to remove a 1999 civic se left door panel


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

May 28, 2009 | 1999 Honda Civic

1 Answer

Need to remove window crank on 1996 honda civic


I have a 97 honda accord and it is helpful to have the tool to remove the clip. you can pick one up pretty reasonably at the local car store. it's pretty much a flat tool that fits between the handle and the door pane.'

Mar 14, 2009 | 1999 Honda Civic

1 Answer

Change window gear on 99 civic


this is from a 97 civic should be the same. remove the door panel. remove 1 screw and pull handle, remove 1 screw and plastic cover over door opener handle. remove speaker cover and three screws underneath. remover window crank. then remove the door panel (held on with plastic plugs...just pull panel toward youself).
8e9dc4a.jpg
e838839.jpg
to remove the regulator ("window crank gears") Remove the glass held in with two 10mm bolts. The regulator itself is held in with six 10mm bolts. Remove these bolts and remove the regulator. (installation is reverse). Note: pay attention to the Idler arm track (highlighted in green) I think this one is directional (the front has to be at the front and the back has to be at the rear)

5a5e384.jpg

Feb 23, 2009 | 1999 Honda Civic

1 Answer

Removing inside door panel from drivers side of 1999 honda civic


two philips screw on the handle ( the one u use to shut the door), one on the far right handside in the middle, one in the other handle ( the one u use to open the door with), after u removed all the screws, put a flat screwdriver at the bottom of the panel and pull it off.

Jan 17, 2009 | 1999 Honda Civic

Not finding what you are looking for?
1999 Honda Civic Logo

Related Topics:

430 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...