Question about 1999 Dodge Durango

1 Answer

Blower motor on a 1999 intriped

I repalced the resister for the switch, this worked for about a week then it went back to just working on high. any help on this would be appreciated.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 5,568 Answers

Your message is kind of misdirected; I think I saw a similar complaint but you need to input the correct model.  There is a chance that the message I vaguely recall turned out to be a failed switch, not the resistor which is a common problem.
If you are in the US, there are numerous sources where you can buy a cheap digital multimeter for  < $20 US; Radio Shack has them as do all of the chain auto parts stores although the latter will be a few dollars more.   Having a meter handy might have saved you the replacement of the resistor. 

Posted on Nov 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 suburban front blower stopped working


More than likely your blower motor resister went bad, that is what regulates the fan speeds

Dec 05, 2012 | 1999 Chevrolet Suburban

1 Answer

The fan switch on the a/c only works on high


repalce blower motor resistor in plenum case under dash, usually 2 screws, easy DIY.

If it blows again, repalce the blower motor, it is drawing too much current.

Jul 24, 2011 | Ford Taurus Cars & Trucks

1 Answer

My Blower motor for my heater on a 99 ford escort is not working.Is it the motor or resister that is gone??the fuses look ok where is the resister located can you send a diagram


look in passenger foot well on blower case for 4 wire connector.



Behind right side of I/P, A/C-heater plenum


resister bad would still allow high speed. may be blower motor.

  • The blower motor does not operate/does not operate correctly
  • Open fuse.
  • Tripped circuit breaker.
  • Circuitry open/shorted.
  • Heater blower motor switch (18578).
  • Heater blower motor switch resistor (18591).
  • Blower motor relay.
  • Blower motor.




bfddb09.gif

Jan 16, 2010 | 1999 Ford Escort

2 Answers

Heater blower motor blows normal then slows down 1999 grand marquis


There is a blower resister within the blower fan that is replacable. Most likely this is the problem

Jan 04, 2010 | 1999 Mercury Grand Marquis

1 Answer

My heater and A/C dont work and before it stopped totally the heat on worked on high. where can i get instuctions on how to fix this


The blower motor resister has gone out,it is next to the blower motor,and the blower motor is bad to,this blower motor was drawing to many amps,and has burned out the blower motor resister.

Jan 01, 2010 | 1999 Pontiac Grand Prix

1 Answer

The heater fan on my 98 chevy silverado stopped working... worked on high at first but made a high pitched noise and stopped all together


Run 12V directly to the motor and see if it will run, if it dosent than the motor is bad, if it does than the resister is bad, the resister makes the blower run and also regulates the speeds for the blower, but chanses are if it was making a high pitch squeel before it quit the motor went out.

Dec 10, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

Front blower motor doesn't work, rear does


yes, all blower motors have them to control their speed, High, medium, low.. etc. I earn nothing by helping you, but my rating, a fixya rating and I will walk you through this

Dec 20, 2008 | 2005 Chrysler Town & Country

7 Answers

Heater Control Switch Only Works on High


Your problem is probably a part called the heater resistor block or board. When this part burns out you will only have high speed on the fan. On my 1999 voyager it is located on the firewall and it snaps in a hole in the firewall. This is under the hood behind the alternator.
Mine had a multi pin black plug plugged into it. Unplug the plug and
you should be able to pull the block out insert new block and plug plug back in and it should come to life.

Jun 05, 2008 | 2001 Chrysler Voyager

Not finding what you are looking for?
1999 Dodge Durango Logo

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...