The fuses are located behind the dash on driver side , u have to remove a little cover turning the screws half turn, the fuse is the F7 10 A or 20 A
check also the relay fuse on engine compartment its the F2 40A .hope it helps
SOURCE: drive/fan belt citroen berlingo
Look under the hood on top of the radiator there is usually some type of a sticker there which show the pulley setup
SOURCE: hi just pick up a citroen berlingo van 2003/4
you dont need a tool mate just finger and thumb pressure
i have have been working on peugeots for 12 years and never needed to use one of them tools
Testimonial: " thats what i do on all the cars i do so thought i would cheak thanks for you reply as iam doning it this weekend thank you"
SOURCE: how do I replace my Berlingo's fan belt?
tensioner on one of the small pulleys with size 15 bolt head.. that will release enough slack to get it on... its spring loaded
SOURCE: how to remove a citroen berlingo dash board
Not very difficult once you disconnect the battery ,then remove the steering wheel and work from their following your nose for the screws ,i think the fittings that hold it in place and the heater unit are on the engine side of the firewall so you have to remove the wiper motor and the plastic trim below the screen .This is a lovely job to do and i dont envy you on this just done a peugeot 306 heater core still have the scratches all over my hands
4,045 views
Usually answered in minutes!
×