Question about 2002 Bentley Arnage

3 Answers

Need maint. light reset procedure for 01 bentley arnage.

I work at an auto repair facility and we have a customers car that we need to reset the maintenance reminder light on, not having any luck finding the procedure in any manuals or online, my shop program doesnt even have any info on the vehicle. Any help would be greatly appreciated. Thx in advance

sean

Posted by on

  • Jacobreyes1 Dec 25, 2008

    I also have a 2000 bently Arnage and would like to reset the servie lite.. myself if possible.. any help would be greatly appreciated..
    thanks, Jake
    jacobreyes1@sbcglobal.net

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Turn key to the 2nd stage 1 being accessories. press the trip & cancel buttons together hold for about 5 to 7 seconds then dissplay will show nothing press againe immediatly for about 5/6 seconds will go into change mode car serial number will be shown where milage was then use the trip button only to navigate to the sign saying service due then hold down cancel button untill it changes coloure from green to red or visa versa then it will beep pres cancel then turn ingision off re-start car

Posted on Oct 01, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 255 Answers

Hi,I had the same situation and now I call the dealer service department for every specific vehicle and they give me the settings to reset them, they are very friendly all the time....

Posted on Nov 20, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just use odb socket and any diagnostic tool takes two seconds.regards willem booms

Posted on May 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bentley arnage


sounds like one or two things could be a connector on the hydraulic damper at fault or edu, would go for damper first, dealer would throw on GDS 3000, to check which one at fault. the seal at the connectors fail or get dirt into them, have a look at all 4 first before dealer option. or it could be a damper faulty. The early cars did tend to have this failure at around the 100,000 mile mark during testing,hope this helps

Jun 03, 2014 | 1999 Bentley Arnage

1 Answer

Thermostat replacement


if you can afford a bentley , you can afford to pay to repair it . Email the company

Feb 26, 2014 | 2003 Bentley Arnage

2 Answers

How to reset service light bentley arnage 2000


You need an OBII scanner to reset the service lights. You can buy one at ant good parts store or even Amazon.com. They go from about $80 to $2500 based on how extreme a unit you want. You can also stop by any Autozone, Advance, etc parts store and they can reset it for you for FREE

Feb 19, 2011 | 2001 Bentley Arnage

1 Answer

Need to reset service light on my 02 arnarge


same as a voltswagon procedure i think ,hold trip button in and turn ignition on and see what happens

Mar 07, 2010 | 2002 Bentley Arnage

1 Answer

1999 Bentley arnage will not start replaced battery but seems to be locked out starter & fuel relay from alarm. can this be bypassed or reset without going to the dealer!


DO NOT TRY TO BYPASS! go to the dealer and have them show you how. you have a very fine vehicle. dont "mickey mouse" the repairs. ive worked on older bentley and rolls royce so feel free to contact for further repair info. cheers.

Dec 02, 2009 | 2001 Bentley Arnage

1 Answer

2003 Bentley Arnage navigation system display malfunction


Hi Bill,

I now have the workshop manual set that covers the Bentley Arnage (1998-2009).

Please let me know if you still need this.

Thanks again,

Sheila & Larry
http://www.ModCollectibles.com
http://mutley.hypermart.net/RollsSubstituteParts.html


bhart2341 wrote:
Do you have a CD Workshop Manual for the 2000 Bentley Arnage Red Label?

Bill Hart

Oct 01, 2009 | 2003 Bentley Arnage

2 Answers

I need to reset the Arnage alarm light.


I would suspect that you might find the solution in the owners manual, just look in the index under Alarm System. You could call your dealer and speak with a Service writer, they might be able to explain how to do it, or it might be a problem that the dealer would need to correct.

Aug 27, 2009 | 2002 Bentley Arnage

1 Answer

Wheel recall


Would all Bentley Arnage and Azure owners please report to their nearest dealer facility, as you may have a screw loose. It's true. Bentley is recalling 550 of its £200,000-plus luxury saloons over fears that the wheels are in danger of falling off. A number of Arnages and Azures produced between February 2005 and August 2006 may have been fitted with the wrong wheel bolts, with several customers reporting rattles from the wheels. "As a precautionary measure we investigated the issue and re-called the other models," says a spokesman for Bentley. "This was the result of a batch of wheel bolts supplied to us which were of the incorrect specification and could become loose and cause a rattle in the car whilst driving. There were no incidents of the wheels falling off the cars."

May 14, 2008 | 2002 Bentley Azure

1 Answer

Wheel recall


Would all Bentley Arnage and Azure owners please report to their nearest dealer facility, as you may have a screw loose. It's true. Bentley is recalling 550 of its £200,000-plus luxury saloons over fears that the wheels are in danger of falling off. A number of Arnages and Azures produced between February 2005 and August 2006 may have been fitted with the wrong wheel bolts, with several customers reporting rattles from the wheels. "As a precautionary measure we investigated the issue and re-called the other models," says a spokesman for Bentley. "This was the result of a batch of wheel bolts supplied to us which were of the incorrect specification and could become loose and cause a rattle in the car whilst driving. There were no incidents of the wheels falling off the cars."

May 14, 2008 | 2002 Bentley Arnage

Not finding what you are looking for?
2002 Bentley Arnage Logo

2,856 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bentley Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

616 Answers

Are you a Bentley Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...