Question about 2002 Chevrolet Venture Passanger

1 Answer

Traction Contrl and ABS Light on

The Traction Control Light and the ABS Light is on in my 2002 Chevy Venture. They will not go off and the morning it wouldn't start. Is that related? Is it something I can fix myself?

Posted by on

  • nozid88 Jan 03, 2009

    the dealer just did a diagnostic test on my 2001 venture and they required me to replace the module and replace one of the check valve that cost me $4,000.00. It's like the value of my van.Is it worth it to fix or i just drive without it. I usually turn off the traction control when there is snow on the ground.
    Nozid

  • Anonymous Mar 14, 2014

    abs/traction light came on. What will cause this?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

No, it is probably not related. Usually the ABS and traction control light is either a wheel sensor problem, located in one of the wheel bearings, or most likely in the wire harness from the wheel bearing sensor. Remove wires and spray clean with a good solvent electric spray, and check the condition of the receptacle. I have had these problems with my 02 AWD so many times it has become almost routine. GM really have a problem with this type of speed sensor in the wheel bearings. In the AWD model, it keeps the car in FWD if the ABS light is on for any reason. JUNK!

Posted on Nov 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed bearings and abs light and stabletrack still on do they reset after u replace the bearings and if so how long


Service Traction Control - Stabilitrak and ABS light, Help - Page ...

chevroletforum.com > ... > Tahoe & Suburban
Aug 16, 2012 - Service Traction Control - Service Stabilitrak and ABS light came on. ... Its supposed to still be under warranty, "Major Guard". ... I replaced my rear shocks with OEM re-manufactured Arnott shocks (great company) and in the ...

SilveradoSierra.com • Traction Control, Stabilitrak & ABS Issue

www.silveradosierra.com/.../traction-control-stabilitrak-abs-issue-t18976...
Jan 28, 2014 - Traction Control, Stabilitrak & ABS Issue. Tue Jan 28 ... The wife and I got in to head out and see my brother and as soon as I turned the key the ServiceTraction Control, Service Stabilitrak messages flashed and the ABS light came on. ... check your wheel bearings my was gone and caused the same thing ...

Chevrolet Impala Questions - Hello. I have a 2012 Chevy ...

www.cargurus.com > Questions > Chevrolet > Impala

CarGurusApr 6, 2013 - Occasionally when I hit the brakes I get a Stabilitrak Error Message " ... I believe GM still had 3 year/ 36,000 mile bumper to bumper ... After about 2 months of intermittent noises the ABS light came on, the service stabilitrak warning, servicetraction ... Edit....left hub bearing change after the right one changed.

Replaced front hub - now ABS/Stabilitrak lights on... - Chevy ...


Dec 12, 2015 | Cars & Trucks

1 Answer

Why is my Lincoln LS V8 2002 has the ABS and Traction Control light on?


The traction control works off the ABS system You will need a scan tool capable of reading ABS codes before you can further diagnose the problem If you are able to retrive the abs codes searrch on the internet for the trouble code Many times it is a wheel sensor or bad connection on the sensors .

Aug 05, 2014 | 2002 Lincoln LS

1 Answer

How to reset ABS light Chevy Venture 2002


abs light will only go out when the problem with the system is corrected, if you've owned this vehicle for a while you've probably repaced the wheel bearings....if the light is on....you probably need to replace one of them again.

Feb 26, 2011 | 2002 Chevrolet Venture Passanger

1 Answer

I have a 2002 chevy impala ls 3.8 V6 automatic transmission with traction control problems, when its cold and you start the car a let it run for about 20 min sometimes when taking off the traction control...


front hubs will affect the traction control, it uses the abs sensor but usually it will turn on the abs light, traction control light and s e s lights

Dec 17, 2010 | 2004 Chevrolet Impala

1 Answer

How to turn traction control on a 2004 chevy venture.abs light is on but wheel bearing has been replaced


SERVICE TRACTION CONTROL and NO TRAC light comes on and off. Changed wheel hub and bearings, alignment, brakes, tires...HELP!!!

Jul 15, 2010 | 2004 Chevrolet Venture Passanger

1 Answer

Lincoln ls year 2000 v8 3.9litres


ABS and traction control really are only for panic stops and if your tires slip on wet surface's and yes each tire has a sensor on it. However if the brake light comes on this has nothing to do with the ABS or traction control lights. It's not a parking brake light. This light tells you, you have a serious brake problem.

May 13, 2009 | 2002 Lincoln LS

1 Answer

2002 Chevy venture indicator trouble


Try disconnecting your battery for about 30 sec to reset the ABS computer. You probly have a trouble code stored in the ABS computer and the lights are letting you know there was a problem. If the light stays on after you reset computer then you will have to pull code to troubleshoot problem.

Joe. ASE Master Tech

Dec 14, 2008 | 2002 Chevrolet Venture Passanger

1 Answer

Service traction system message on dash


This light is usually caused by a problem in the ABS system. A problem in the ABS system will dissable the traction control system. you will need to have the computers scanned for trouble codes.


Tech JK
-------------------------------

Dec 09, 2008 | 2002 Chevrolet Impala

1 Answer

2000 venture


The abs control module is not communicating with the cars computer. I would have the vehicle checked for codes and check the abs control module.

Oct 08, 2008 | 2000 Chevrolet Venture

2 Answers

Traction control light and abs light


ok your problem is that your brakes are under force you shold get new brake pads ok

Jul 14, 2008 | 2002 Audi A4

Not finding what you are looking for?
2002 Chevrolet Venture Passanger Logo

1,636 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...